CONTENTS
Part 6-- ACI 506R-05 to ITG-7-09
506 Guide to Shotcrete--ACI 506R-05
506 Guide to Fiber-Reinforced Shotcrete--ACI 506.1R-08
506 Specification for Shotcrete--ACI 506.2-95
506 Guide for the Evaluation of Shotcrete--ACI 506.4R-94 (Reapproved 2004)
506 Guide for Specifying Underground Shotcrete--ACI 506.5R-09
522 Pervious Concrete--522R-06
522 Specification for Pervious Concrete Pavement--522.1-08
523 Guide for Cast-in-Place Low-Density Cellular Concrete--ACI 523.1R-06
523 Guide for Precast Cellular Concrete Floor, Roof, and Wall Units--ACI 523.2R-96
523 Guide for the Design and Construction of Autoclaved Aerated Concrete Panels--ACI 523.4R-09
524 Guide to Portland Cement-Based Plaster--ACI 524R-08
530 Building Code Requirements for Masonry Structures--TMS 402-08/ACI 530-08/ASCE 5-08
530 Specification for Masonry Structures--TMS 602-08/ACI 530.1-08/ASCE 6-08
530 Commentary on Building Code Requirements for Masonry Structures--
TMS 402-08/ACI 530R-08/ASCE 5-08
530 Commentary on Specification for Masonry Structures--
TMS 602-08/ACI 530.1R-08/ASCE 6-08
533 Guide for Precast Concrete Wall Panels--ACI 533R-93 (Reapproved 2004)
533 Design Responsibility for Architectural Precast-Concrete Projects--ACI 533.1R-02
543 Design, Manufacture, and Installation of Concrete Piles--ACI 543R-00 (Reapproved 2005)
544 Report on Fiber Reinforced Concrete--ACI 544.1R-96 (Reapproved 2002)
544 Measurement of Properties of Fiber Reinforced Concrete--ACI 544.2R-89 (Reapproved 1999)
544 Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete--ACI 544.3R-08
544 Design Considerations for Steel Fiber Reinforced Concrete--ACI 544.4R-88 (Reapproved 1999)
546 Concrete Repair Guide--ACI 546R-04
546 Guide to Underwater Repair of Concrete--ACI 546.2R-98
546 Guide for the Selection of Materials for the Repair of Concrete--ACI 546.3R-06
548 Guide for the Use of Polymers in Concrete--ACI 548.1R-09
548 Report on Polymer-Modified Concrete--ACI 548.3R-09
548 Standard Specification for Latex-Modified Concrete (LMC) Overlays--ACI 548.4-93(Reapproved 1998)
548 Guide for Polymer Concrete Overlays--ACI 548.5R-94 (Reapproved 1998)
548 Test Method for Load Capacity of Polymer Concrete Underground Utility Structures--ACI 548.7-04
548 Specification for Type EM (Epoxy Multi-Layer) Polymer Overlay for Bridge and Parking Garage Decks--ACI 548.8-07*
548 Specification for Type ES (Epoxy Slurry) Polymer Overlay for Bridge and Parking Garage Decks--ACI 548.9-08*
549 Report on Ferrocement--ACI 549R-97 (Reapproved 2009)
549 Guide for the Design, Construction, and Repair of Ferrocement--ACI 549.1R-93 (Reapproved 2009)
549 Report on Thin Reinforced Cementitious Products--ACI 549.2R-04
550 Guide to Emulating Cast-in-Place Detailing for Seismic Design of Precast Concrete Structures--ACI 550.1R-09
551 Tilt-Up Concrete Construction Guide--551.1R-05
555 Removal and Reuse of Hardened Concrete--ACI 555R-01
ITG 1 Special Hybrid Moment Frames Composed of Discretely Jointed Precast and Post-Tensioned Concrete Members and Commentary--ACI T1.2-03/T1.2R-03*
ITG 3 Report on Bridge Decks Free of Steel Reinforcement--ACI ITG-3-04
ITG 4 Specification for High-Strength Concrete in Moderate to High Seismic Applications--ACI ITG-4.1-07
ITG 4 Materials and Quality Considerations for High-Strength Concrete in Moderate to High Seismic Applications--ACI ITG-4.2R-06
ITG 4 Report on Structural Design and Detailing for High-Strength Concrete in Moderate to High Seismic Applications--ACI ITG-4.3R-07
ITG 5 Acceptance Criteria for Special Unbonded Post-Tensioned Precast Structural Walls Based on Validation Testing and Commentary--ACI ITG-5.1-07*
ITG 5 Requirements for Design of a Special Unbonded Post-Tensioned Precast Shear Wall Satisfying ACI ITG-5.1 (ACI ITG-5.2-09) and Commentary--ACI ITG-5.2-09
ITG 7 Specification for Tolerances for Precast Concrete--ITG-7-09*
ACI Design Handbook--SP-17(09) (Synopsis only)
| Part of : | ACI MCP10PACK |
| Published : | 2010 |
