AENOR UNE-EN 12312-5/A1 PDF

This document specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of AFE when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines, airports and fuelling companies.

This document applies to all types of aircraft fuelling equipment:

—  aircraft refuellers;

—  hydrant dispensers;

—  defuellers;

—  hydrant pit servicing vehicles;

—  stationary dispensing units,

intended to service aircraft with aviation fuels and to be operated on airfields, heliports and other aircraft refuelling related areas such as maintenance bases.

NOTE 1 In general, the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) is not applicable to AFE as they are not deemed to be used on public roads. However, certain requirements have been considered when developing this standard.

The use of AFE on public roads is not intended with the following exceptions:

—  transportation of fuel from tank farms to refuelling areas;

—  maintenance purposes with empty cargo tanks.

NOTE 2 This may include the need of local traffic derogation (see Clause 0 of EN 1915-1:2001 — negotiation).

The intended functions of AFE are:

—  loading fuel from the tank farm and/or a hydrant system to the AFE;

—  storage and transportation of fuel;

—  fuelling from the AFE to the aircraft;

—  filtration of the fuel;

—  metering the fuel for a transfer of custody;

—  defuelling the aircraft to the AFE;

—  flushing fuel from hydrant systems;

—  unloading AFE to the tank farm after defuelling of an aircraft; 

—  transferring fuel from one AFE to another.

This document does not apply to: 

—  AFE whose only power source for aircraft refuelling is directly applied manual effort;

—  hydrant systems, tank farms, pipework and underground tanks;

—  specific hazards due to the operation of the AFE in a potentially explosive atmosphere;

—  built-in fire extinguisher systems.

This document does not establish requirements for noise and vibration.

Noise and vibration are dealt with respectively in EN 1915-4 and EN 1915-3.

This document does not deal with hazards in respect to a standard automotive chassis and from other vehicles on the apron.

This document is not applicable to AFE which are manufactured before the date of publication of this document by CEN.

This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.