THE SPECIFICATION ESTABLISHES THE REQUIREMENTS FOR PROCUREMENT OF
SELF-PLUGGING BLIND RIVETS, WITH A MECHANICALLY LOCKED SOLID
SPINDLE, WHICH CAN BE INSTALLED IN ASSEMBLIES OR CONSTRUCTION. THESE
BLIND RIVETS ARE INTENDED FOR USE IN AIRCRAFT STRUCTURAL OR SIMILAR
APPLICATIONS IN BOTH THICK AND THIN SHEETS. THE BULBED BLIND HEAD
CONFIGURATION MAKES THESE RIVETS ESPECIALLY SUITED FOR THIN SHEET
OR DOUBLE DIMPLED APPLICATIONS.
STYLES, CLASSES, AND CODES - RIVETS SHALL BE FURNISHED IN THE FOLLOWING
STYLES, CLASSES AND CODES.
STYLE 'A' NOMINAL SHANK DIAMETER
CLASS 1 - PROTRUDING HEAD RIVETS (MS20470)
CODE B - 5056 ALUMINUM ALLOY SLEEVE-ALLOY STEEL SPINDLE
CODE E - 5056 ALUMINUM ALLOY SLEEVE-CRES SPINDLE
CLASS 2 - 100 DEGREE FLUSH HEAD (MS20426)
CODE B - 5056 ALUMINUM ALLOY SLEEVE-ALLOY STEEL SPINDLE
CODE E - 5056 ALUMINUM ALLOY SLEEVE-CRES SPINDLE
CLASS 3 - 100 DEGREE FLUSH SHEAR HEAD (NAS1097)
CODE B - 5056 ALUMINUM ALLOY SLEEVE-ALLOY STEEL SPINDLE
CODE E - 5056 ALUMINUM ALLOY SLEEVE-CRES SPINDLE
STYLE 'B' 1/64" OVERSIZE SHANK DIAMETER
CLASS 1 - PROTRUDING HEAD RIVETS (MS20470)
CODE B - 5056 ALUMINUM ALLOY SLEEVE-ALLOY STEEL SPINDLE
CODE E - 5056 ALUMINUM ALLOY SLEEVE-CRES SPINDLE
CLASS 2 - 100 DEGREE FLUSH HEAD (MS20426)
CODE B - 5056 ALUMINUM ALLOY SLEEVE-ALLOY STEEL SPINDLE
CODE E - 5056 ALUMINUM ALLOY SLEEVE-CRES SPINDLE
CLASS 4 - FLANGED DOME HEAD
CODE B - 5056 ALUMINUM ALLOY SLEEVE-ALLOY STEEL SPINDLE
CODE E - 5056 ALUMINUM ALLOY SLEEVE-CRES SPINDLE
| File Size : | 1
file
, 1.1 MB |
| Number of Pages : | 20 |
| Published : | 04/11/2000 |
| Revision : | 3 |
