AIA NASM20068 PDF

Published Date: 11/30/2022

KEY, MACHINE, SQUARE IN CROSS SECTION, BOTH ENDS ROUND

Published Date: 12/27/2019

KEY, MACHINE, SQUARE IN CROSS SECTION, BOTH ENDS ROUND

Published Date: 09/19/2014

KEY, MACHINE, SQUARE IN CROSS SECTION, BOTH ENDS ROUND

Published Date: 10/29/2010

KEY, MACHINE, SQUARE IN CROSS SECTION, BOTH ENDS ROUND

Published Date: 10/01/1998

Key, Machine-Square in Cross Section, Both Ends Round

Published Date: 10/31/2012

STRAP, RETAINING, ONE HOLE FOR PIPE, RIGID CONDUIT AND CABLE

Published Date: 04/28/2017

BUSHING, SLEEVE, PRESS FIT, UNDERSIZE INSIDE DIAMETER

Published Date: 08/31/2022

PLUG, MACHINE SCREW, PROTECTIVE, PLASTIC

Published Date: 02/26/2021

SCREW, MACHINE-FLAT 100 DEG HEAD FULL THREAD, OFFSET CRUCIFORM

Published Date: 01/01/1991

Addendum 1 to ANSI/NCITS X3.100-1989, Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks - NUI and NUI-Derived Facility Extensions (formerly ANSI X3.100-1989(R1995) Add.1:1991)

Published Date: 01/01/1989

Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks (CCITT X.25) (formerly ANSI X3.100-1989(R1995)

Published Date: 01/01/1983

Unrecorded Magnetic Tape Minicassette For Information Interchange, Coplanar 3.81 mm (0.150 Inch) (formerly ANSI X3.103-1983(R1996))

Published Date: 01/01/1990

Specification for General Purpose Paper Cards for Information Interchange (formerly ANSI X3.11-1990(R2002))

Published Date: 01/01/1986

Matrix Character Sets for Optical Character Recognition (OCR-M) (formerly ANSI X3.111-1986(R1997))

Published Date: 01/01/1984

14-Inch (356 mm) Diameter Low Surface Friction Magnetic Storage Disk (formerly ANSI X3.112-1984(R1996))