Name:
ASTM A635/A635M-13 PDF

Published Date:
10/01/2013

Status:
Active

Description:

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

Publisher:
ASTM International

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

1.1 This specification covers the general requirements for hot-rolled, heavy-thickness sheet and strip in coils.

1.2 It applies to Specifications A414/A414M, A424/A424M, and A1018/A1018M.

1.3 This material is available only in coils described as follows:

	Size Limits, Coils Only
Product	Width, in. [mm]	Thickness, in. [mm]

Strip	over 8 to 12, incl [over 200 through 300]	0.230 to 1.000, incl [from 6.0 through 25]
Sheet	All Widths^A All Widths	0.230 to 1.000, incl [from 6.0 through 25]

^A Hot-rolled heavy thickness sheet in coils less than 12 in. [300 mm] and less in width must have slit edges. Hot-rolled heavy thickness coils 12 in. [300 mm] and wider with mill edge is considered hot-rolled heavy thickness strip.

Note 1-The changes in width limits with the publication of A635/A635M - 06a result in a change in tensile testing direction for material from 0.180 in. [4.5 mm] to 0.230 in. exclusive [6.0 mm exclusive] over 48 in. [1200 mm] wide as that material is now covered by Specification A568/A568M - 06a. The purchaser is advised to discuss this change with the supplier.

1.4 In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of this general specification.

1.5 Annex A1 lists permissible variations in dimensions and mass (see Note 2) in SI [metric] units. The values listed are not exact conversions of the values listed in the inch-pound tables, but instead are rounded or rationalized values. Conformance to Annex A1 is mandatory when the “M” specification is used.

Note 2-The term weight is used when inch-pound units are the standard. However, under SI, the preferred term is mass.

1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.7 This specification and the applicable material specifications are expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

File Size :	1 file , 120 KB
Note :	This product is unavailable in Russia, Ukraine, Belarus
Number of Pages :	11
Published :	10/01/2013
Redline File Size :	2 files , 220 KB

History

ASTM A635/A635M-22

Published Date: 09/01/2022

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

$18.9

ASTM A635/A635M-14

Published Date: 10/01/2014

$20.7

ASTM A635/A635M-13

Published Date: 10/01/2013

$20.1

ASTM A635/A635M-09b

Published Date: 11/01/2009

$20.1

ASTM A635/A635M-09a

Published Date: 10/01/2009

$20.1

ASTM A635/A635M-09

Published Date: 05/01/2009

$18

ASTM A635/A635M-08

Published Date: 11/01/2008

$18

ASTM A635/A635M-07

Published Date: 09/01/2007

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

$20.1

ASTM A635/A635M-06a

Published Date: 05/01/2006

$18

ASTM A635/A635M-06

Published Date: 03/01/2006

$18

ASTM A635/A635M-05

Published Date: 05/01/2005

$18

ASTM A635/A635M-04e1

Published Date: 03/01/2004

$18

ASTM A635/A635M-04

Published Date: 03/01/2004

$18

ASTM A635/A635M-02

Published Date: 03/10/2002

Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements

$18