Name:
ASTM A915/A915M-08(2013) PDF
Published Date:
04/01/2013
Status:
Active
Publisher:
ASTM International
1.1 This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades.
1.2 Several grades are covered and are designated by chemical composition shown in Table 1.
| Grade | C | Mn | P, max | S, max | Si | Ni | Cr | Mo |
|
| ||||||||
| SC 1020 | 0.18/0.23 | 0.40/0.80 | 0.040 | 0.040 | 0.30/0.60 | . . . | . . . | . . . |
| SC 1025 | 0.22/0.28 | 0.40/0.80 | 0.040 | 0.040 | 0.30/0.60 | . . . | . . . | . . . |
| SC 1030 | 0.28/0.34 | 0.50/0.90 | 0.040 | 0.040 | 0.30/0.60 | . . . | . . . | . . . |
| SC 1040 | 0.37/0.44 | 0.50/0.90 | 0.040 | 0.040 | 0.30/0.60 | . . . | . . . | . . . |
| SC 1045 | 0.43/0.50 | 0.50/0.90 | 0.040 | 0.040 | 0.30/0.60 | . . . | . . . | . . . |
| SC 4130 | 0.28/0.33 | 0.40/0.80 | 0.035 | 0.040 | 0.30/0.60 | . . . | 0.80/1.10 | 0.15/0.25 |
| SC 4140 | 0.38/0.43 | 0.70/1.10 | 0.035 | 0.040 | 0.30/0.60 | . . . | 0.80/1.10 | 0.15/0.25 |
| SC 4330 | 0.28/0.33 | 0.60/0.90 | 0.035 | 0.040 | 0.30/0.60 | 1.65/2.00 | 0.70/0.90 | 0.20/0.30 |
| SC 4340 | 0.38/0.43 | 0.60/0.90 | 0.035 | 0.040 | 0.30/0.60 | 1.65/2.00 | 0.70/0.90 | 0.20/0.30 |
| SC 8620 | 0.18/0.23 | 0.60/1.00 | 0.035 | 0.040 | 0.30/0.60 | 0.40/0.70 | 0.40/0.60 | 0.15/0.25 |
| SC 8625 | 0.23/0.28 | 0.60/1.00 | 0.035 | 0.040 | 0.30/0.60 | 0.40/0.70 | 0.40/0.60 | 0.15/0.25 |
| SC 8630 | 0.28/0.33 | 0.60/1.00 | 0.035 | 0.040 | 0.30/0.60 | 0.40/0.70 | 0.40/0.60 | 0.15/0.25 |
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
| File Size : | 1 file , 60 KB |
| Note : | This product is unavailable in Russia, Ukraine, Belarus |
| Number of Pages : | 3 |
| Published : | 04/01/2013 |
