Name:
ASTM B582-07(2013) PDF
Published Date:
02/01/2013
Status:
Active
Publisher:
ASTM International
1.1 The specification2 covers plate, sheet, and strip of nickel-chromium-iron-molybdenum-copper alloys (UNS N06007, N06975, N06985, and N06030)* as shown in Table 1, for use in general corrosive service.
| Element | Composition Limits, % | ||||
|
| Alloy N06007 | Alloy N06975 | Alloy N06985 | Alloy N06030 | |
| Nickel |
| remainderA | 47.0 to 52.0 | remainderA | remainderA |
| Chromium |
| 21.0 to 23.5 | 23.0 to 26.0 | 21.0 to 23.5 | 28.0 to 31.5 |
| Iron |
| 18.0 to 21.0 | remainderA | 18.0 to 21.0 | 13.0 to 17.0 |
| Molybdenum |
| 5.5 to 7.5 | 5.0 to 7.0 | 6.0 to 8.0 | 4.0 to 6.0 |
| Copper |
| 1.5 to 2.5 | 0.70 to 1.20 | 1.5 to 2.5 | 1.0 to 2.4 |
| Manganese |
| 1.0 to 2.0 | 1.0 max | 1.0 max | 1.5 max |
| Cobalt, max |
| 2.5 | ... | 5.0 | 5.0 |
| Carbon, max |
| 0.05 | 0.03 | 0.015 | 0.03 |
| Tungsten |
| 1.0 max | ... | 1.5 max | 1.5 to 4.0 |
| Silicon, max |
| 1.0 | 1.0 | 1.0 | 0.8 |
| Phosphorus, max |
| 0.04 | 0.03 | 0.04 | 0.04 |
| Sulfur, max |
| 0.03 | 0.03 | 0.03 | 0.02 |
| Columbium + tantalum |
| 1.75 to 2.50 | ... | 0.50 max | 0.30 to 1.50 |
| Titanium |
| ... | 0.70-1.50 | ... | ... |
1.2 The following products are covered under this specification:
1.2.1 Sheet and Strip-Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
| File Size : | 1 file , 67 KB |
| Note : | This product is unavailable in Russia, Ukraine, Belarus |
| Number of Pages : | 3 |
| Published : | 02/01/2013 |
