ASTM B977-11 PDF

1.1 This specification covers titanium and titanium alloy ingots as follows:

1.1.1 Grade 1 - Unalloyed titanium,

1.1.2 Grade 2 - Unalloyed titanium,

1.1.3 Grade 3 - Unalloyed titanium,

1.1.4 Grade 4 - Unalloyed titanium,

1.1.5 Grade 5 - Titanium alloy (6 % aluminum, 4 % vanadium),

1.1.6 Grade 6 - Titanium alloy (5 % aluminum, 2.5 % tin),

1.1.7 Grade 7 - Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.8 Grade 9 - Titanium alloy (3 % aluminum, 2.5 % vanadium),

1.1.9 Grade 11 - Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.10 Grade 12 - Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

1.1.11 Grade 13 - Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.12 Grade 14 - Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.13 Grade 15 - Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.14 Grade 16 - Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.15 Grade 17 - Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.16 Grade 18 - Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,

1.1.17 Grade 19 - Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),

1.1.18 Grade 20 - Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 to 0.08 % palladium,

1.1.19 Grade 21 - Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),

1.1.20 Grade 23 - Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitials, ELI),

1.1.21 Grade 24 - Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.4 to 0.8 % palladium,

1.1.22 Grade 25 - Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 to 0.8 % nickel and 0.04 to 0.08 % palladium,

1.1.23 Grade 26 - Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.24 Grade 27 - Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.25 Grade 28 - Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,

1.1.26 Grade 29 - Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial elements, ELI) plus 0.08 to 0.14 % ruthenium,

1.1.27 Grade 30 - Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.28 Grade 31 - Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.29 Grade 32 - Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),

1.1.30 Grade 33 - Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.31 Grade 34 - Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.32 Grade 35 - Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),

1.1.33 Grade 36 - Titanium alloy (45 % niobium),

1.1.34 Grade 37 - Titanium alloy (1.5 % aluminum), and

1.1.35 Grade 38 - Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 The following caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.