ASTM C1648-12(2018) PDF

ASTM C1648-12(2018) PDF

Name:
ASTM C1648-12(2018) PDF

Published Date:
08/01/2018

Status:
Active

Description:

Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass

Publisher:
ASTM International

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$22.8
Need Help?

1.1 This guide identifies and describes seven test methods for measuring the index of refraction of glass, with comments relevant to their uses such that an appropriate choice of method can be made. Four additional methods are mentioned by name, and brief descriptive information is given in Annex A1. The choice of a test method will depend upon the accuracy required, the nature of the test specimen that can be provided, the instrumentation available, and (perhaps) the time required for, or the cost of, the analysis. Refractive index is a function of the wavelength of light; therefore, its measurement is made with narrow-bandwidth light. Dispersion is the physical phenomenon of the variation of refractive index with wavelength. The nature of the test-specimen refers to its size, form, and quality of finish, as described in each of the methods herein. The test methods described are mostly for the visible range of wavelengths (approximately 400 to 780 μm); however, some methods can be extended to the ultraviolet and near infrared, using radiation detectors other than the human eye.

1.1.1 List of test methods included in this guide:

1.1.1.1 Becke line (method of central illumination),

1.1.1.2 Apparent depth of microscope focus (the method of the Duc de Chaulnes),

1.1.1.3 Critical Angle Refractometers (Abbe type and Pulfrich type),

1.1.1.4 Metricon2 system,

1.1.1.5 Vee-block refractometers,

1.1.1.6 Prism spectrometer, and

1.1.1.7 Specular reflectance.

1.1.2 Test methods presented by name only (see Annex A1):

1.1.2.1 Immersion refractometers,

1.1.2.2 Interferometry,

1.1.2.3 Ellipsometry, and

1.1.2.4 Method of oblique illumination.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.3 Warning-Refractive index liquids are used in several of the following test methods. Cleaning with organic liquid solvents also is specified. Degrees of hazard associated with the use of these materials vary with the chemical nature, volatility, and quantity used. See manufacturer's literature and general information on hazardous chemicals.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


File Size : 1 file , 310 KB
Note : This product is unavailable in Russia, Ukraine, Belarus
Number of Pages : 15
Published : 08/01/2018

History

ASTM C1648-12(2023)
Published Date: 07/01/2023
Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
$18.9
ASTM C1648-12(2018)
Published Date: 08/01/2018
Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
$22.8
ASTM C1648-12
Published Date: 10/01/2012
Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
$20.1

Related products

ASTM C158-23
Published Date: 11/01/2023
Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
$18.9
ASTM C650-20
Published Date: 06/01/2020
Standard Test Method for Determination of Resistance to Chemical Substances
$13.8
ASTM C370-12(2024)
Published Date: 08/01/2024
Standard Test Method for Moisture Expansion of Fired Whiteware Products
$16.5
ASTM C1028-07e1
Published Date: 07/15/2007
Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method (Withdrawn 2014)
$18

Best-Selling Products