ASTM D2622-05 PDF

ASTM D2622-05 PDF

Name:
ASTM D2622-05 PDF

Published Date:
11/01/2005

Status:
Active

Description:

Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

Publisher:
ASTM International

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$18
Need Help?
le-phase and either liquid at ambient conditions, liquefiable with moderate heat, or soluble in hydrocarbon solvents. These materials can include diesel fuel, jet fuel, kerosine, other distillate oil, naphtha, residual oil, lubricating base oil, hydraulic oil, crude oil, unleaded gasoline, M-85 and M-100.

1.2 Interlaboratory studies on precision covered a variety of materials with sulfur concentrations ranging from approximately 3 mg/kg to 5.3 mass %. For a subset of these samples, with sulfur concentrations below 60 mg/kg, the repeatability standard deviation (S r) was 1.5 mg/kg. An estimate of the limit of detection is 3 Sr, and an estimate of the limit of quantitation is 10 S r. However, because instrumentation covered by this test method can vary in sensitivity, the applicability of the test method at sulfur concentrations below approximately 20 mg/kg must be determined on an individual basis.

1.3 Samples containing more than 5.0 mass % sulfur can be diluted to bring the sulfur concentration of the diluted material within the scope of this test method.

1.4 Volatile samples (such as high vapor pressure gasolines or light hydrocarbons) may not meet the stated precision because of selective loss of light materials during the analysis.

1.5 A fundamental assumption in this test method is that the standard and sample matrix are well matched. Matrix mismatch can be caused by C/H ratio differences between samples and standards (see ) or by the presence of other heteroatoms (see ).

1.6 The values stated in either SI units or angstrom units are to be regarded as standard.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


File Size : 1 file , 110 KB
Note : This product is unavailable in Russia, Ukraine, Belarus
Number of Pages : 7
Published : 11/01/2005
Redline File Size : 2 files , 200 KB

History

ASTM D2622-24
Published Date: 07/01/2024
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
$20.7
ASTM D2622-21
Published Date: 12/01/2021
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
$24.9
ASTM D2622-10
Published Date: 02/15/2010
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
$20.1
ASTM D2622-08
Published Date: 03/01/2008
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
$20.1
ASTM D2622-07
Published Date: 07/15/2007
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
$20.1
ASTM D2622-05
Published Date: 11/01/2005
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
$18
ASTM D2622-03
Published Date: 09/10/2003
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
$18
ASTM D2622-98
Published Date: 04/10/1998
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
$18
ASTM D2622-94
Published Date: 01/01/1994
Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
$15.6
ASTM D2622-92e1
Published Date: 01/01/1992
Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
$15.6

Related products

ASTM D2386-19
Published Date: 05/01/2019
Standard Test Method for Freezing Point of Aviation Fuels
$15
ASTM D2274-14(2019)
Published Date: 12/01/2019
Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
$15
ASTM D3336-20b
Published Date: 11/01/2020
Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
$15.6
ASTM D2624-22
Published Date: 10/01/2022
Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
$18.9

Best-Selling Products

PFI ES11
Published Date: 01/01/1996
Permanent Marking on Piping Materials
PFI ES16
Published Date: 01/01/1985
Access Holes, Bosses and Plugs for Radiographic Inspection of Pipe Welds
PFI ES1
Published Date: 07/01/1995
Internal Machining & Solid Machined Backing Rings for Circumferential Butt Welds
PFI ES20
Published Date: 01/01/1997
Wall Thickness Measurement by Ultrasonic Examination
PFI ES21
Published Date: 01/01/1992
Internal Machining & Fit-Up of GTAW Root Pass Circumferential Butt Welds
PFI ES22
Published Date: 01/01/1995
Recommended Practice for Color Coding of Piping Materials