ASTM D5006-24 PDF

ASTM D5006-24 PDF

Name:
ASTM D5006-24 PDF

Published Date:
07/01/2024

Status:
Active

Description:

Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

Publisher:
ASTM International

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$18.9
Need Help?
1.1 This test method covers a technique for measuring the concentration of Diethylene Glycol Monomethyl Ether (DiEGME) in aviation fuels. A measured volume of fuel, extracted with a fixed ratio of water, is tested with a suitable refractometer to determine the concentration of fuel system icing inhibitor (FSII) in fuel. Precision estimates have been determined for the DiEGME additive using specific extraction ratios with a wide variety of fuel types. The extraction ratios are high enough that portable handheld refractometers can be used, but not so high as to sacrifice accuracy or linearity, or both, in the 0.01 % to 0.25 % by volume range of interest.
1.2 DiEGME is fully described in Specification D4171 and in other specifications.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 WARNING-Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use Caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

File Size : 1 file , 260 KB
Note : This product is unavailable in Russia, Ukraine, Belarus
Number of Pages : 5
Published : 07/01/2024
Redline File Size : 2 files , 340 KB

History

ASTM D5006-24
Published Date: 07/01/2024
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
$18.9
ASTM D5006-11(2021)
Published Date: 05/01/2021
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
$22.5
ASTM D5006-11
Published Date: 05/01/2011
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
$18
ASTM D5006-10e1
Published Date: 08/01/2010
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
$18
ASTM D5006-10
Published Date: 08/01/2010
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
$15.6
ASTM D5006-03
Published Date: 12/01/2003
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
$15.6
ASTM D5006-02
Published Date: 06/10/2002
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
$15.6
ASTM D5006-96
Published Date: 12/10/1996
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
$15

Related products

ASTM D4616-23
Published Date: 10/01/2023
Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
$20.7
ASTM D5846-24
Published Date: 05/01/2024
Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
$18.9
ASTM D3828-16a(2021)
Published Date: 07/01/2021
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
$17.1
ASTM D6121-19ae1
Published Date: 11/01/2019
Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
$23.4

Best-Selling Products

ASHRAE/ICC/USGBC/IES 189.1-2017 Addendum a
Published Date: 2019
Addendum a to Standard 189.1-2017 for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (ANSI Approved; ICC, USGBC and IES Co-sponsored)
Free Download
ASHRAE/ICC/USGBC/IES 189.1-2017 Addendum aa
Published Date: 2020
Addendum aa to Standard 189.1-2017 for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (ANSI Approved; ICC, USGBC and IES Co-sponsored)
Free Download
ASHRAE/ICC/USGBC/IES 189.1-2017 Addendum ab
Published Date: 2020
Addendum ab to Standard 189.1-2017 for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (ANSI Approved; ICC, USGBC and IES Co-sponsored)
Free Download
ASHRAE/ICC/USGBC/IES 189.1-2017 Addendum ac
Published Date: 2020
Addendum ac to Standard 189.1-2017 for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (ANSI Approved; ICC, USGBC and IES Co-sponsored)
Free Download
ASHRAE/ICC/USGBC/IES 189.1-2017 Addendum ad
Published Date: 2019
Addendum ad to Standard 189.1-2017 for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (ANSI Approved; ICC, USGBC and IES Co-sponsored)
Free Download
ASHRAE/ICC/USGBC/IES 189.1-2017 Addendum ae
Published Date: 2020
Addendum ae to Standard 189.1-2017 for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (ANSI Approved; ICC, USGBC and IES Co-sponsored)
Free Download