ASTM D6448-14 PDF

ASTM D6448-14 PDF

Name:
ASTM D6448-14 PDF

Published Date:
10/01/2014

Status:
Active

Description:

Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

Publisher:
ASTM International

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$18
Need Help?

1.1 This specification covers four grades of fuel oil made in whole or in part with hydrocarbon-based used or reprocessed lubricating oil or functional fluids, such as preservative and hydraulic fluids. The four grades of fuel are intended for use in various types of fuel-oil-burning industrial equipment under various climatic and operating conditions. These fuels are not intended for use in residential heaters, small commercial boilers, combustion engines, or marine applications,

1.1.1 Grades RFO4, RFO5L, RFO5H, and RFO6 are used lubricating oil blends, with or without distillate or residual fuel oil, or both, of increasing viscosity and are intended for use in industrial burners equipped to handle these types of recycled fuels.

Note 1: For information on the significance of the terminology and test methods used in this specification, see Appendix X1.

1.2 This specification is for use in contracts for the purchase of fuel oils derived from used lubricating oil and for the guidance of consumers of such fuels. This specification does not address the frequency with which any particular test must be run.

1.3 Nothing in this specification shall preclude observance of national or local regulations, which can be more restrictive. In some jurisdictions, used oil is considered a hazardous waste and fuels from used oil are required to meet certain criteria before use as a fuel.

Note 2: For United States federal requirements imposed on used oil generators, transporters and transfer facilities, reprocessors, marketers, and burners, see 40 CFR 279.

Note 3: The generation and dissipation of static electricity can create problems in the handling of distillate burner fuel oils. For more information on the subject, see Guide D4865.

1.4 The values stated in SI units are to be regarded as standard; non-SI units, when given, are for information only.


File Size : 1 file , 120 KB
Note : This product is unavailable in Russia, Ukraine, Belarus
Number of Pages : 6
Published : 10/01/2014
Redline File Size : 2 files , 200 KB

History

ASTM D6448-24
Published Date: 07/01/2024
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
$18.9
ASTM D6448-16(2022)
Published Date: 10/01/2022
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
$22.5
ASTM D6448-14
Published Date: 10/01/2014
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
$18
ASTM D6448-09
Published Date: 06/15/2009
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
$18
ASTM D6448-04
Published Date: 12/01/2004
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
$18
ASTM D6448-99
Published Date: 07/10/1999
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
$17.4

Related products

ASTM D5800-21
Published Date: 10/01/2021
Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
$23.4
ASTM D6200-21
Published Date: 12/01/2021
Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
$16.2
ASTM D6423-20a
Published Date: 07/01/2020
Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
$15.6
ASTM D6557-18e1
Published Date: 10/01/2018
Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
$18.9

Best-Selling Products

SN-INSTA/TS 950:2014
Published Date: 04/30/2014
Fire Safety Engineering - Comparative method to verify fire safety design in buildings
SN-INSTA/TS 952:2019
Published Date: 08/20/2019
Fire Safety Engineering - Review and Control in the Building Process