ASTM F877-11 PDF

ASTM F877-11 PDF

Name:
ASTM F877-11 PDF

Published Date:
06/01/2011

Status:
Active

Description:

Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

Publisher:
ASTM International

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$17.4
Need Help?
1.1 This specification covers requirements, test methods, and marking requirements for system components when tested with nominal SDR9 crosslinked polyethylene tubing as a system. Systems are intended for 100 psi (0.69 MPa) water service up to and including a maximum working temperature of 180 degrees F (82 degrees C). Requirements and test methods are included for materials, workmanship, dimensions and tolerances, burst pressure, sustained pressure, excessive temperature and pressure, and thermo-cycling tests. The components covered by this specification are intended for use in residential and commercial, hot and cold, potable water distribution systems or other applications such as municipal water service lines, radiant panel heating systems, hydronic baseboard heating systems, snow and ice melting systems, and building services pipe.

1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.3 The values stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are provided for information only.

Note 1?Suggested hydrostatic design stresses and hydrostatic pressure ratings for tubing and fittings are listed in Appendix X1. Design, assembly, and installation considerations are discussed in Appendix X2. An optional performance qualification and an in-plant quality control program are recommended in Appendix X3.

1.4 The following safety hazards caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
File Size : 1 file , 130 KB
Note : This product is unavailable in Russia, Ukraine, Belarus
Number of Pages : 8
Published : 06/01/2011
Redline File Size : 2 files , 280 KB

History

ASTM F877-24
Published Date: 02/01/2024
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$18.9
ASTM F877-23
Published Date: 02/01/2023
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$22.5
ASTM F877-22
Published Date: 07/01/2022
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$20.4
ASTM F877-20
Published Date: 01/01/2020
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$19.2
ASTM F877-19
Published Date: 11/01/2019
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$18
ASTM F877-18a
Published Date: 08/01/2018
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$18
ASTM F877-18
Published Date: 04/01/2018
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-11a
Published Date: 08/01/2011
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-11
Published Date: 06/01/2011
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-05
Published Date: 03/01/2005
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-02a
Published Date: 10/10/2002
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-02e1
Published Date: 05/10/2002
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-02
Published Date: 05/10/2002
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-01e1
Published Date: 01/10/2001
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-01
Published Date: 01/10/2001
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$17.4
ASTM F877-00
Published Date: 01/01/2000
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
$17.4

Related products

ASTM D2290-19a
Published Date: 08/01/2019
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
$16.2
ASTM D4161-24
Published Date: 08/15/2024
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
$16.5
ASTM F1483-23
Published Date: 02/15/2023
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
$17.1
ASTM F794-21
Published Date: 04/01/2021
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
$15.6

Best-Selling Products

BSMI A3004200
Published Date: 06/18/1987
Method of Test for Hollow Concrete Blocks
$0.9
BSMI B1013500
Published Date: 01/28/1980
Symbols for Indication Appearing on Machine Tools
BSMI C4017600
Published Date: 04/23/1980
Residual current protective device
$4.2
BSMI K1008900
Published Date: 01/06/1965
Nitrocellulose for Industrial Use
$1.8
BSMI K4001800
Published Date: 07/15/1993
Inner Tubes for Automobile Tires
$2.4
BSMI L1001600
Published Date: 11/23/1981
Care Labelling of Textile Goods
$6.6