AWWA WQTC69315 PDF

AWWA WQTC69315 PDF

Name:
AWWA WQTC69315 PDF

Published Date:
11/01/2008

Status:
Active

Description:

Direct Membrane Filtration on Surface Water: Practical Insights to Fouling for Soft Surface Water

Publisher:
American Water Works Association

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$7.2
Need Help?
The City of Gardner, Massachusetts, was the first community in the state to use ultrafiltration membranes with a 100,000 MWCO (~ 0.1 µm) using a polysulfone (PS) material on a surface water source. However, shortly after the new membrane system was installed, the system was unable to pass the rated production capacity by the manufacture, with a particular problem during the fall turnover period. An autopsy of the membrane surface suggested a thick silica fouling layer. Various acid, base, and disinfectant schemes were tested along with increased backwashing capabilities, with no success. This left in question whether the issue was inherent with the membranes or rather, a function of the source water. As such, it was decided to rent a full scale microfiltration membrane unit with a different membrane material (Polyvinylidene di-fluoride or PVDF), but similar pore size (~ 0.1 µm) and test the two systems side-by-side. It was determined that the PVDF membranes performed better than the PS membranes at the full scale pilot test for the Crystal Lake source water. Generally the PS system lost production and became more fouled over time. The PVDF membranes, however, demonstrated a resilient system that had limited irreversible fouling and generally a higher specific flux. The Unified Modified Fouling Index (UMFI) was implemented and provided insight into the relative performance of the system, as operational changes were made and could be used as an index that the operator could implement in determining how a change in membrane operation affects membrane performance. In general, the following observations were made from the pilot testing results: dosing the raw water with an alum coagulant was essential for both membranes to obtain the higher flux rates; and, the PS membrane required approximately 10 square feet of membrane to produce 1 gallon of water during a run, and as the membranes fouled, required upwards of greater than 20 square feet of membrane area. When alum was dosed, the PVDF membranes required less than 5 square feet of membrane to produce 1 gallon of water. The PVDF membranes exhibited a similar trend as the PS membranes when the alum was turned off. Includes 3 references, tables, figures.
Edition : Vol. - No.
File Size : 1 file , 1 MB
Note : This product is unavailable in Ukraine, Russia, Belarus
Number of Pages : 20
Published : 11/01/2008

History


Related products

AWWA WQTC69470
Published Date: 11/01/2008
Removal of Bromide and Natural Organic Matter by Anion Exchange
$7.2
AWWA WQTC69456
Published Date: 11/01/2008
Measuring Dose Distribution by Lagrangian Actinometry: A New Protocol for UV Reactor Validation
$7.2
AWWA WQTC69432
Published Date: 11/01/2008
Identification of Heterotrophic Bacteria that Colonize Pilot- and Full-Scale Chloraminated Distribution Systems
$7.2
AWWA WQTC69465
Published Date: 11/01/2008
Removal of Selected EDCs and PhACs from Drinking Water by a Powdered Activated Carbon/Ultrafiltration System
$7.2

Best-Selling Products

SN-CEN/TR 10261:2008
Published Date: 07/30/2008
Iron and steel — Review of available methods of chemical analysis
SN-CEN/TR 10261:2013
Published Date: 02/27/2013
Iron and steel — European standards for the determination of chemical composition
SN-CEN/TR 10261:2018
Published Date: 10/03/2018
Iron and steel — European standards for the determination of chemical composition
SN-CEN/TR 10261:2023
Published Date: 05/12/2023
Iron and steel — European standards for the determination of chemical composition
SN-CEN/TR 1030-2:2016
Published Date: 05/04/2016
Hand-arm vibration — Guidelines for vibration hazards reduction — Part 2: Management measures at the workplace
SN-CEN/TR 10317:2009
Published Date: 07/15/2009
European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization