BS EN 1915-1:2001+A1:2009 applies to GSE when used in civil air transport as intended by the manufacturer and
contains safety requirements relating to the equipment in general.
BS EN 1915-1:2001+A1:2009 deals with the technical requirements to minimize the hazards listed in clause 4 which
can arise during operation and maintenance of GSE as intended by the manufacturer or his authorised
representative.
BS EN 1915-1:2001+A1:2009 is intended to be used in conjunction with EN 1915-2, EN 1915-3 (for vehicles)
and EN 1915-4, and with the relevant part of EN 12312."
BS EN 1915-1:2001+A1:2009 does not apply to unmodified automotive parts when used on GSE for the purpose for
which they are designed.
BS EN 1915-1:2001+A1:2009 does not establish additional requirements for the following:
- operation elsewhere than in an airport environment;
- operation in severe conditions, e.g. ambient temperature below -20 C or over 50 C, tropical or
saturated salty atmospheric environment, strong magnetic or radiation field;
- operation subject to special rules, e.g. potentially explosive atmosphere except as regards operation
in the vicinity of an aircraft fuel tank during fuelling operation;
- hazards caused by power supply other than from electrical networks;
- hazards occurring during construction, transportation, commissioning and decommissioning of the
GSE;
- hazards caused by wind velocity in excess of the figures given in this European Standard;
- direct contact with food stuffs;
- earthquake, flood, landslide, lightning and more generally any natural catastrophe;
- electromagnetic compatibility (EMC);
- cableless remote control;
- hazards caused by noise and vibration, see EN 1915-3 and EN 1915-4;"
- hazards caused by errors in the software.
BS EN 1915-1:2001+A1:2009 is not applicable to GSE which are manufactured before the date of publication by CEN
of this Standard.
Cross References:EN 294
EN 349
EN 811
EN 894-1:1997
EN 894-3:2000
EN 953
EN 954-1:1996
EN 982:1996
EN 983:1996
EN 1050:1996
EN 1915-2:2001
EN 1915-3
EN 1915-4
EN 12312
EN 60073
IEC 60073:1996
EN 60204-1
IEC 60204-1:2005
EN 60529:1991
IEC 60529:1989
EN ISO 3411
ISO 3411:2007
EN ISO 3457
ISO 3457:1986
EN ISO 6682:1995
ISO 6682:1986
ISO 6682:1986/AMD 1:1989
EN ISO 7731:2008
ISO 7731:2003
EN ISO 12100-1:2003
ISO 12100-1:2003
EN ISO 12100-2:2003
ISO 12100-2:2003
EN ISO 13732-1
ISO 13732-1:2006
EN ISO 13850
ISO 13850:2006
ISO 3795:1989
ISO 3864
ISO 6966-1:2005
EN 547-1:1996
EN 547-2:1996
EN 574:1996
EN 614-1:1995
EN 1037:1995
EN 1088:1995
EN 1570:1998
prEN 1757-1:1994
EN ISO 7250:1997
ISO 4116:1986
ISO 4413:1998
ISO 7000:1989
ISO 7715:1985
ECE 43
ECE 79
ECE 104
70/156/EEC
78/548/EEC
92/58/EEC
ARP 1247C
AIR 1375
AIR 1558
AHM 910
AHM 913
AHM 916
AHM 918
98/37/EC
98/79/EC
Incorporates the following:Amendment, May 2009. Amends and replaces BS EN 1915-1:2001
| File Size : | 1
file
, 860 KB |
| ISBN(s) : | 9780580610653 |
| Note : | This product is unavailable in Ukraine, Russia, Belarus |
| Number of Pages : | 50 |
| Product Code(s) : | 30174117, 30174117, 30174117 |
| Published : | 05/31/2009 |
