BS EN IEC 61238-1-3:2019+A11:2019 PDF

This part of IEC 61238 applies to compression and mechanical connectors for power cables for rated voltages above 1 kV (U_m = 1,2 kV) up to 36 kV (U_m = 42 kV), for example buried cables or cables installed in buildings, having

a) conductors complying with IEC 60228 having nominal cross-sectional areas between 2,5 mm² and 1 200 mm² for copper and between 16 mm² and 1 200 mm² for aluminium, excluding Milliken conductors;

b) a maximum continuous conductor temperature not exceeding 90 °C.

This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact.

The object of this document is to define the type test methods and requirements which apply to compression and mechanical connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused conductors.

Cross References:
IEC 60949:1988
IEC 60949:1988/AMD1:2008
IEC 60050-461
IEC 60493-1
EN 60228
IEC 60228
EN IEC 61238-1-2
EN 61238-1
EN 62475:2010
IEC 61238-1
IEC 61238-1-1
CEI 20-28:1998
EN IEC 61238-1-1
IEC 61238-1-2
IEC 62475:2010
BS 4579-3:1976


All current amendments available at time of purchase are included with the purchase of this document.

File Size :	1 file , 1.5 MB
ISBN(s) :	9780539023428
Note :	This product is unavailable in Ukraine, Russia, Belarus
Number of Pages :	50
Product Code(s) :	30383242, 30383242, 30383242
Published :	10/08/2019