BS EN 10025-2:2004 specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 to 6 (chemical composition) and Tables 7 to 9 (mechanical properties) in the delivery conditions as given in 6.3. Three engineering steels are also specified in BS EN 10025-2:2004 (see Tables 3 and 5) (chemical composition) and Table 8 (mechanical properties). BS EN 10025-2:2004 does not apply to structural hollow sections and tubes (see EN 10210-1 and EN 10219-1).
The technical delivery conditions apply to thicknesses greater than or equal to 3 mm and less than or equal to 150 mm for long products of steel grade S450J0. The technical delivery conditions apply to thicknesses less than or equal to 250 mm for flat and long products of all other grades and qualities. In addition for flat products of qualities J2 and K2 the technical conditions apply to thicknesses less than or equal to 400 mm.
Products made of steel grades S185, E295, E335 and E360 cannot be CE marked. The steels specified in this Part 2 are not intended to be heat treated except products delivered in delivery condition +N. Stress relief annealing is permitted (see also the NOTE in 7.3.1.1 of EN 10025-1:2004).Products delivered in +N condition can be hot formed and/or normalized after delivery (see Clause 3).
NOTE 1 Semi-finished products which are to be converted to rolled finished products conforming to this document should be the subject of special agreement at the time of the enquiry and order. The chemical composition can also be agreed at the time of the order, however the values should be within the limits of Tables 2 and 3.
NOTE 2 For certain grades and product forms suitability for particular applications may be specified at the time of the enquiry and order (see 7.4.2, 7.4.3 and Table 10).
Cross References:EN 1011-2
EN 10020
EN 10025-1:2004
EN 10027-1
EN 10027-2
EN 10163-1
EN 10163-2
EN 10163-3
EN 10164
EN 10221
CR 10260
EN 10017
EN 10024
EN 10029
EN 10034
EN 10048
EN 10051
EN 10055
EN 10056-1
EN 10056-2
EN 10058
EN 10059
EN 10060
EN 10061
EN 10067
EN 10162
EN 10279
EN 10160
EN 10306
EN 10308
EN ISO 643
ISO 643:2003
EN ISO 1461
ISO 1461:1999
EN ISO 14713
ISO 14713:1999
ECSC IC 2:1983
| File Size : | 1
file
, 530 KB |
| ISBN(s) : | 0580447790 |
| Note : | This product is unavailable in Ukraine, Russia, Belarus |
| Number of Pages : | 38 |
| Product Code(s) : | 30016724, 30016724 |
| Published : | 11/17/2004 |
