BS EN 16798-7:2017 describes the methods to calculate the ventilation air flow rates for buildings
to be used for energy calculations evaluation, heating and cooling loads.
This European Standard applies to buildings with one or more of the following characteristics:
- mechanical ventilation systems (mechanical exhaust, mechanical supply or balanced system);
- passive duct ventilation systems for residential and low-rise non-residential buildings;
- combustion appliances;
- window openings (manual or automatic operation); and
- kitchens where cooking is for immediate use (including restaurants).
This European Standard is applicable to hybrid systems combining mechanical and passive duct
ventilation systems in residential and low-rise non-residential buildings.
This European Standard applies to buildings with a building height of less than 100 m and rooms where
vertical air temperature difference is smaller than 15 K.
The results provided by the standard are:
- the air flow rates entering or leaving a ventilation zone; and
- the air flow rates required to be distributed by the mechanical ventilation system, if present.
This European Standard is not applicable to:
- buildings with kitchens where cooking is not for immediate use; and
- buildings with industry process ventilation.
The definition of ventilation and airtightness requirements (as indoor air quality, heating and cooling,
safety, fire protection, etc.) is not covered by this document. The definition of window opening
scenarios is not covered by this document.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the
modular structure as set out in prENISO 52000-1.
NOTE 1 In prENISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the
relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2 The modules represent EPB standards, although one EPB standard might cover more than one module
and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method
respectively. See also Clause 2 and Tables A.1 and B.1.
Cross References:EN 12792:2003
EN 13141-5:2004
EN 13141-1:2004
EN 13141-2:2010
ISO 7345:1987 CEN/TR 1749:2014
ISO 15927-1:2003 (R09) Ed 1
CEN/TS 16629:2014
CEN/TR 16798-8:2017
CEN/TS 16628:2014
EN ISO 15927-1(ISO 15927-1) AS
All current amendments available at time of purchase are included with the purchase of this document. | File Size : | 1
file
, 2.5 MB |
| ISBN(s) : | 9780580858772 |
| Note : | This product is unavailable in Ukraine, Russia, Belarus |
| Number of Pages : | 62 |
| Product Code(s) : | 30297496, 30297496, 30297496 |
| Published : | 07/14/2017 |
