Preface:
This is the second edition of CAN/CSA-CEI/IEC 61000-4-3,
Electromagnetic compatibility (EMC) — Part 4-3: Testing and measurement techniques — Radiated, radio-frequency, electromagnetic field immunity test, which is an adoption without modification of the identically titled CEI/IEC (Commission Électrotechnique Internationale/International Electrotechnical Commission) Standard 61000-4-3 (third edition, 2006-02). This Standard supersedes the first edition published in 2001 as CAN/CSA-CEI/IEC 61000-4-3 (adopted CEI/IEC 61000-4-3:1995+A1:1998).
Scope and object:
This part of IEC 61000 is applicable to the immunity requirements of electrical and electronic equipment to radiated electromagnetic energy. It establishes test levels and the required test procedures.
The object of this standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to radiated, radio-frequency electromagnetic fields. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon.
NOTE 1 As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity tests for their products.
This part deals with immunity tests related to the protection against RF electromagnetic fields from any source.
Particular considerations are devoted to the protection against radio-frequency emissions from digital radiotelephones and other RF emitting devices.
NOTE 2 Test methods are defined in this part for evaluating the effect that electromagnetic radiation has on the equipment concerned. The simulation and measurement of electromagnetic radiation is not adequately exact for quantitative determination of effects. The test methods defined are structured for the primary objective of establishing adequate repeatability of results at various test facilities for qualitative analysis of effects.
This Standard is an independent test method. Other test methods may not be used as substitutes for claiming compliance with this standard.
| Edition : | 3rd |
| File Size : | 1
file
, 1.6 MB |
| ISBN(s) : | 9781554364590 |
| Number of Pages : | 133 |
| Product Code(s) : | 2418550, 2418550 |
| Published : | 02/01/2007 |
