CSA C747-09 (R2019) PDF

CSA C747-09 (R2019) PDF

Name:
CSA C747-09 (R2019) PDF

Published Date:
10/01/2009

Status:
Active

Description:

Energy efficiency test methods for small motors, Includes Update No. 1 (2016)

Publisher:
CSA Group

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$138.6
Need Help?
Scope

1.1 This Standard specifies the test methods to be used in measuring the energy efficiency of small direct-current (dc) and single- and three-phase alternating-current (ac) rotating motors. This Standard includes the following motor types:
(a) capacitor, permanent-split;
(b) capacitor, capacitor-start or capacitor-run;
(c) split phase;
(d) split phase start, capacitor-run;
(e) shaded pole;
(f) reluctance;
(g) polyphase induction;
(h) dc;
(i) permanent magnet;
(j) brushless dc; and
(k) inverter driven.

1.2 This Standard applies to
(a) dc and three-phase ac motors with output power rated greater than or equal to 0.186 kW and less than 0.746 kW at 1800 RPM (or equivalent); and
(b) single-phase ac motors rated greater than or equal to 0.186 kW. The test method specified in this Standard may be applied to smaller motors.

1.3 This Standard specifies quoting methods and allowable tolerances on nominal efficiency values.

1.4 This Standard applies only to motors rated as continuous duty.

1.5 SI units of measurement should be used in the application of this Standard; however, other units may be used for testing provided that they are used consistently.

1.6 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Edition : 2nd
File Size : 1 file , 970 KB
ISBN(s) : 9781554912131
Note : This product is unavailable in Russia, Ukraine, Belarus
Number of Pages : 26
Product Code(s) : 2420315, 2420227, 2420227
Published : 10/01/2009

History

CSA C747:22
Published Date: 10/18/2022
Energy efficiency test methods for small motors, Includes Errata (2023)
$75
CSA C747-09 (R2019)
Published Date: 10/01/2009
Energy efficiency test methods for small motors, Includes Update No. 1 (2016)
$138.6

Related products

CSA C838-13 (R2022)
Published Date: 03/01/2013
Energy efficiency test methods for three-phase variable frequency drive systems, Includes Update No. 1 (2014)
$92.7

Best-Selling Products

INCITS 100-1989(R1995) Add. 1:1991
Published Date: 01/01/1991
Addendum 1 to ANSI/NCITS X3.100-1989, Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks - NUI and NUI-Derived Facility Extensions (formerly ANSI X3.100-1989(R1995) Add.1:1991)
INCITS 100-1989(R1995)
Published Date: 01/01/1989
Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks (CCITT X.25) (formerly ANSI X3.100-1989(R1995)
INCITS 103-1983(R1996)
Published Date: 01/01/1983
Unrecorded Magnetic Tape Minicassette For Information Interchange, Coplanar 3.81 mm (0.150 Inch) (formerly ANSI X3.103-1983(R1996))
INCITS 11-1990(R2002)
Published Date: 01/01/1990
Specification for General Purpose Paper Cards for Information Interchange (formerly ANSI X3.11-1990(R2002))
$18
INCITS 111-1986(R1997)
Published Date: 01/01/1986
Matrix Character Sets for Optical Character Recognition (OCR-M) (formerly ANSI X3.111-1986(R1997))
INCITS 112-1984(R1996)
Published Date: 01/01/1984
14-Inch (356 mm) Diameter Low Surface Friction Magnetic Storage Disk (formerly ANSI X3.112-1984(R1996))