DANSK DS/EN 12984 + A1 PDF

1.1 This European Standard covers portable and/or hand-guided machines and appliances equipped with mechanically driven cutting tools. This European Standard specifies requirements for the design and manufacture of portable and/or hand-guided machines and appliances equipped with electrically, hydraulically or pneumatically driven cutting tools (see Figures 1 to 9), hereinafter referred to as ""machines"". The machines covered by this European Standard are used for slaughtering animals, for cutting up animal carcasses, poultry and other foodstuff such as e.g. fish. They are mainly intended for use in slaughterhouses and rooms, which are used for cutting and preparing. These machines are used for the industry and trade. This European Standard specifies all significant hazards, hazardous situations and events relevant to the machines in the scope, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards which can arise during commissioning, operation, maintenance and de-commissioning of the machine. This European Standard is not applicable to portable and/or hand-guided machines and appliances equipped with electrically, hydraulically or pneumatically driven cutting tools, which are manufactured before the date of publication of this European Standard by CEN. 1.2 This European Standard covers the following machines subdivided into tool types: 1.2.1 Saws (see Figures 1 to 5) - Circular saws (see Figures 1 and 2); - straight blade reciprocating saws (see Figures 3 and 4); - band saws (see Figure 5). Figure 1 – Cutting saw Figure 2 – Leg saw, horn saw Figure 3 – Sternum saw Figure 4 – Reciprocating saw Figure 5 – Band saw for carcasses 1.2.2 Shears, pincers (see Figures 6 and 7) Figure 6 – Pincer/shear Figure 7 – Pincer for cutting the feet of pigs/shear 1.2.3 Knives (see Figures 8 and 9) - Ring-blade circu