DANSK DS/EN 13871 PDF

1.1 General This European Standard covers cube cutting machines (see Figures 1 to 6 and 12 to 18) and specifies requirements for the design and manufacture. The machines covered by this document are used to size reduce fresh meat, meat products and products of the same kind (e.g. fish, vegetables and cheese) by cutting in a cutting chamber. This document deals with all significant hazards, hazardous situations and events relevant to machines, appliances and machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document deals with the hazards which can arise during all the lifetime of the machine, including the phases of transport, assembly, operation, maintenance, dismantling, disabling and scrapping of the machine. This document is not applicable to cubes cutting machines which are manufactured before the date of publication of this document by CEN. 1.2 Types of cube cutting machines covered by this standard This European Standard covers the following types of cubes cutting machines: - cubes cutting machines with a forward feed plunger, a lattice and a sickle/multi-segment blade with loading by hand (see Figure 2); - cubes cutting machines with a forward feed plunger, a lattice, a sickle/multi-segment blade, a feed intake hopper and a loading device (see Figure 1); - cubes cutting machines with a rotating cutting tool, a sickle/multi-segment blade and a feed conveyor (see Figures 3 and 5); - cubes cutting machines with a rotating cutting tool and centrifugal force loading (see Figure 6); - cubes cutting machines with or without integrated conveyor systems. 1.3 Machine construction Cubes cutting machines are constructed of a machine frame, a feed intake chamber/magazine, a forward feed plunger or nip roller, a lattice or a rotating cutting tool, a sickle/multi-segment blade, an associated drive and electrical, hydraulic and pneumatic components, depending o ...