DANSK DS/EN 15553 PDF

DANSK DS/EN 15553 PDF

Name:
DANSK DS/EN 15553 PDF

Published Date:
12/14/2021

Status:
[ Active ]

Description:

Petroleum products and related materials – Determination of hydrocarbon types – Fluorescent indicator adsorption method

Publisher:
Dansk Standard

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Czech version):
200 business days

SKU:
dansk-ds-en-15553_2666467

Choose Document Language:
15.30 €
Need Help?

This document specifies a fluorescent indicator adsorption method for the determination of hydrocarbon types over the concentration ranges from 5 % (V/V) to 99 % (V/V) aromatic hydrocarbons, 0,3 % (V/V) to 55 % (V/V) olefins, and 1 % (V/V) to 95 % (V/V) saturated hydrocarbons in petroleum fractions that distil below 315 °C. This method can apply to concentrations outside these ranges, but the precision has not been determined. When samples containing oxygenated blending components are analysed, the hydrocarbon type results can be reported on an oxygenate-free basis or, when the oxygenate content is known, the results can be corrected to a total-sample basis. This test method is applicable to full boiling range products. Cooperative data have established that the precision statement does not apply to petroleum fractions with narrow boiling ranges near the 315 °C limit. Such samples are not eluted properly, and results are erratic. It does not apply to samples containing dark-coloured components that interfere with reading the chromatographic bands that cannot be analysed. NOTE 1 – The oxygenated blending components methanol, ethanol, tert-butyl methyl ether (MTBE), methyl tert-pentyl ether (TAME) and tert-butyl ethyl ether (ETBE) do not interfere with the determination of hydrocarbon types at concentrations normally found in commercial petroleum blends. These oxygenated compounds are not detected since they elute with the alcohol desorbent. The effects of other oxygenated compounds are individually verified. NOTE 2 – For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction. WARNING – The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


Edition : 21
File Size : 1 file , 1.1 MB
Number of Pages : 19
Product Code(s) : DS-017, DS-017
Published : 12/14/2021

History

DANSK DS/EN 15553
Published Date: 12/14/2021
Petroleum products and related materials – Determination of hydrocarbon types – Fluorescent indicator adsorption method
15.30 €
DANSK DS/EN 15553
Published Date: 06/15/2007
Petroleum products and related materials – Determination of hydrocarbon types – Fluorescent indicator adsorption method
15.30 €

Related products

DANSK DS/IEC PAS 62923-101
Published Date: 10/03/2022
Maritime navigation and radiocommunication equipment and systems – Bridge alert management – Part 101: Guideline on implementation
26.10 €
DANSK DS/EN 10259
Published Date: 08/04/1997
Cold-rolled stainless steel wide strip and plate/sheet - Tolerances on dimensions and shape
11.40 €
DANSK DS/EN ISO 4254-1
Published Date: 10/21/2015
Agricultural machinery – Safety – Part 1: General requirements
30.30 €
DANSK DS/EN 17037+A1
Published Date: 01/04/2022
Daylight in buildings
30.30 €

Best-Selling Products

VDI/VDE/GESA 2635 Sheet 2
Published Date: 01/01/2004
Experimental structural analysis - Recommended practice for high-temperature strain measurements
VDI/VDE/GESA 2636
Published Date: 10/01/2000
Certification of courses and examinations in strain gage measurement technology