DANSK DS/EN 60079-15 PDF

This part of EN 60079 specifies requirements for the construction, testing and marking for Group II electrical apparatus with type of protection, "n" intended for use in explosive gas atmospheres. This part is applicable to non-sparking electrical apparatus and also to electrical apparatus with parts or circuits producing arcs or sparks or having hot surfaces which, if not protected in one of the ways specified in this standard, could be capable of igniting a surrounding explosive gas atmosphere. This standard describes several different methods by which this can be achieved which may be combined with other methods described in EN 60079-0. This part supplements the general requirements in EN 60079-0. The relationship of EN 60079-0 to this part is as indicated in Table 1. NOTE 1 A non-incendive component is limited in use to the particular circuit for which it has been shown to be non-ignition capable and, therefore, cannot be separately assessed as complying with this standard. NOTE 2 Compliance with this standard does not imply any removal of, or lowering of the requirements of any other standard with which the electrical apparatus complies. NOTE 3 This part supplements, and may enhance, the requirements for apparatus for normal industrial applications. Where compliance with other EN standards is indicated, such as EN 60034 for motors and EN 60598-2 for luminaries, proving compliance to those standards is normally the responsibility of the manufacturer.