DANSK DS/EN 747-1 PDF

DANSK DS/EN 747-1 PDF

Name:
DANSK DS/EN 747-1 PDF

Published Date:
03/19/2024

Status:
[ Active ]

Description:

Furniture – Bunk beds and high beds – Part 1: Safety, strength and durability requirements

Publisher:
Dansk Standard

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$18
Need Help?

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use. It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor. This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades. If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply. The document contains one annex: - Annex A (informative) – Rationales.


Edition : 24#
File Size : 1 file , 1.2 MB
Number of Pages : 21
Product Code(s) : DS-021, DS-021
Published : 03/19/2024

History

DANSK DS/EN 747-1
Published Date: 03/19/2024
Furniture – Bunk beds and high beds – Part 1: Safety, strength and durability requirements
$18
DANSK DS/EN 747-1+A1
Published Date: 06/25/2015
Furniture – Bunk beds and high beds – Part 1: Safety, strength and durability requirements
$13.2

Related products

DANSK DS/EN 3531
Published Date: 04/10/2007
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a <= 6 mm - 1 750 MPa <= Rm <= 2 000 MPa
$11.4
DANSK DSF/EN ISO 18082/FPRA1
Published Date:
Anaesthetic and respiratory equipment – Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases – Amendment 1 (ISO 18082:2014/FDAmd 1:2017)
$4.2
DANSK DS/EN 1870-14 + A2
Published Date: 04/23/2012
Safety of woodworking machines – Circular sawing machines – Part 14: Vertical panel sawing machines
$33
DANSK DS/ISO 5057
Published Date: 08/17/2022
Industrial trucks – Inspection and repair of fork arms in service on fork-lift trucks
$12.6

Best-Selling Products

INCITS 100-1989(R1995) Add. 1:1991
Published Date: 01/01/1991
Addendum 1 to ANSI/NCITS X3.100-1989, Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks - NUI and NUI-Derived Facility Extensions (formerly ANSI X3.100-1989(R1995) Add.1:1991)
INCITS 100-1989(R1995)
Published Date: 01/01/1989
Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks (CCITT X.25) (formerly ANSI X3.100-1989(R1995)
INCITS 103-1983(R1996)
Published Date: 01/01/1983
Unrecorded Magnetic Tape Minicassette For Information Interchange, Coplanar 3.81 mm (0.150 Inch) (formerly ANSI X3.103-1983(R1996))
INCITS 11-1990(R2002)
Published Date: 01/01/1990
Specification for General Purpose Paper Cards for Information Interchange (formerly ANSI X3.11-1990(R2002))
$18
INCITS 111-1986(R1997)
Published Date: 01/01/1986
Matrix Character Sets for Optical Character Recognition (OCR-M) (formerly ANSI X3.111-1986(R1997))
INCITS 112-1984(R1996)
Published Date: 01/01/1984
14-Inch (356 mm) Diameter Low Surface Friction Magnetic Storage Disk (formerly ANSI X3.112-1984(R1996))