Name:
DANSK DS/EN ISO 12944-9 PDF

Published Date:
02/19/2018

Status:
[ Active ]

Description:

Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)

Publisher:
Dansk Standard

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

SAME AS ISO 12944-9

ISO 12944-9:2018 specifies the performance requirements for protective paint systems for offshore and related structures (i.e. those exposed to the marine atmosphere, as well as those immersed in sea or brackish water). Such structures are exposed to environments of corrosivity category CX (offshore) and immersion category Im4 as defined in ISO 12944‑2. ISO 12944-9:2018 describes paint systems for high durability according to ISO 12944‑1. ISO 12944-9:2018 is applicable to structures made of carbon steel and does not cover Cd/Bi Cr and Zn/Bi Cr surfaces. It is not applicable to surfaces under insulation or concrete. This document is applicable for paint systems intended for a service temperature range between −20 °C and +80 °C, and the performance testing is aimed at verifying suitability of the paint systems for this temperature range. ISO 12944-9:2018 is applicable for paint systems for submerged service (Im4) which are intended for ambient operating temperatures up to a maximum of 50 °C. ISO 12944-9:2018 specifies: - the test methods to be used to determine the composition of the separate components of the protective paint system; - the laboratory performance test methods for the assessment of the likely durability of the protective paint system; - the criteria to be used to evaluate the results of performance tests. ISO 12944-9:2018 covers the requirements for new work and any repairs necessary before start-up. It can also be used in relation to maintenance where complete refurbishment is carried out and the underlying metal substrate is completely exposed by abrasive blast-cleaning. ISO 12944-9:2018 does not address maintenance in general where methods of surface preparation other than abrasive blast-cleaning are typically used. ISO 12944-9:2018 deals with structures, made of carbon steel of not less than 3 mm thickness, which are designed using an approved strength calculation. The following are not covered by this document: - structures built of stainless steel as well as those built of copper, titanium or aluminium or their alloys; - steel cables; - buried structures; - pipelines; - the interiors of storage tanks.

Edition :	18
File Size :	1 file , 1.6 MB
Number of Pages :	38
Product Code(s) :	DS-036, DS-036
Published :	02/19/2018

History

DANSK DSF/FPREN ISO 12944-9

Published Date:

Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO/FDIS 12944-9:2017)

$12

DANSK DS/EN ISO 12944-9

Published Date: 02/19/2018

$23.4

Related products

DANSK DS/IEC 62893-3

Published Date: 11/27/2017

Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV – Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V

$15.3

DANSK DS/EN 1648-1

Published Date: 01/22/2018

Leisure accommodation vehicles – 12 V direct current extra low voltage electrical installations – Part 1: Caravans

$15.3

DANSK DS/EN 61754-24-11

Published Date: 11/26/2009

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117

$15.3

DANSK DSF/FPREN IEC 61674

Published Date:

Medical electrical equipment – Dosimeters with ionization chambers and/or semiconductor detectors as used in x-ray diagnostic imaging

$14.7

Best-Selling Products

CAN/CSA-CEI/IEC 1000-1-1-97 (R2023)

Published Date: 01/18/2000

Electromagnetic Compatibility (EMC) - Part 1: General - Section 1: Application and Interpretation of Fundamental Definitions and Terms (Adopted CEI/IEC 1000-1-1:1992)

$37.8

CAN/CSA-CEI/IEC 1000-2-1-97 (R2023)

Published Date: 01/18/2000

Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 1: Description of the Environment - Electromagnetic Environment for Low-Frequency Conducted Disturbances and Signalling in Public Power Supply Systems (Adopted CEI/IEC 1000- 2-1:1990) / Compatibilite electromagnetique (CEM) - Partie

$36.3

CAN/CSA-CEI/IEC 1160-96 (R2001)

Published Date: 05/03/2000

Formal Design Review (Adopted CEI/IEC 1160:1992) / Revue de conception formalisee (norme CEI/IEC 1160:1992 adoptee)

$31.5

CAN/CSA-CEI/IEC 1258-98 (R2002)

Published Date: 02/25/2000

Guidelines for the Development and Use of Medical Electrical Equipment Educational Materials (Adopted CEI/IEC 1258:1994, first edition) / Guide pour le developpement et l'utilisation des supports educatifs relatifs aux appareils electromedicaux (norme CEI/IEC 1258:1994 adoptee, premiere edition) **

CAN/CSA-CEI/IEC 1288-1-98 (R2012)

Published Date: 02/16/2000

Cardiac Defibrillators - Cardiac Defibrillators-Monitors - Part 1: Operation (Adopted CEI/IEC 1288-1:1993, first edition) / Defibrillateurs cardiaques - Moniteurs-defibrillateurs cardiaques - Partie 1: Fonctionnement (norme CEI/IEC 1288-1:1993 adoptee, premiere edition)

CAN/CSA-CEI/IEC 1288-2-98 (R2012)

Published Date: 02/16/2000

Cardiac Defibrillators - Cardiac Defibrillators-Monitors - Part 2: Maintenance (Adopted CEI/IEC 1288-2:1993, first edition) / Defibrillateurs cardiaques - Moniteurs-defibrillateurs cardiaques - Partie 2: Maintenance (norme CEI/IEC 1288-2:1993 adoptee, premiere edition)