DANSK DS/EN ISO 15614-8 PDF

This International Standard specifies requirements for the qualification testing of welding procedures for the arc welding of tube to tube-plate joints in metallic materials by manual, mechanized or automatic processes. This standard is a part of a series of standards. Details of this series are given in ISO 15607, Annex A. Qualification by tube to tube-plate joint tests can be used for all joints even if they are fully loaded or only seal welded as required in application standards. In such cases, one or more special test pieces should be made to simulate the production joint in all essential features, e.g. dimensions, restraint, heat sink effects. The test should be carried out prior to and under the conditions to be used in production. This standard applies to fusion welding of metallic materials for tube to tube-plate joints with a gap between the tube and the tube plate for some length of the tube plate thickness. This standard does not apply to tubesheets with forged end connections with welded tubes (external/internal bore welds). For welding of tube to tube-plate joints with mechanical expansion which is load bearing welding procedure test should be defined in the specification. For other applications and/or requirements the standard can be used if required by the specification. Repair welding should be considered in the welding procedure test.