DANSK DS/EN ISO 22476-4 PDF

This document deals with equipment requirements, the execution of and reporting on the Ménard pressuremeter test. NOTE – This part of ISO 22476 fulfils the requirement for the Ménard pressuremeter test, as part of geotechnical investigation and testing according to EN 1997-1 and EN 1997-2. The present document describes the procedure for conducting a Ménard pressuremeter test in natural soils, treated or untreated fills and in rocks, either on land or off-shore. The pressuremeter tests results of this document are suited to a quantitative determination of ground strength and deformation parameters. They may yield lithological information in conjunction with measuring while drilling performed when creating the hole (according to EN ISO 22476-15). They can also be combined with direct investigation (e;g; sampling according to EN ISO 22475-1) or compared with other in situ tests (see EN 1997-2, 2.4.1.4(2) P, 4.1 (1) P and 4.2.3(2) P). The Ménard pressuremeter test is performed by the radial expansion of a cylindrical probe of a minimum slenderness of 6, placed in the ground (see Figure 1). During the injection of the liquid volume in the probe, the inflation of the measuring cell first brings the outer cover of the probe into contact with the pocket wall and then presses on them resulting in a soil displacement. Pressure applied to, and the associated radial expansion of the probe are measured either by volume or radial transducers and recorded so as to obtain the stress-strain relationship of the soil as tested.