DANSK DSF/ETSI EN 302 066 V2.2.1 (2020-04) PDF

The present document specifies the requirements for Ground- and Wall- Probing Radar imaging systems applications. Ground Probing Radars (GPR) and Wall Probing Radars (WPR) are used in survey and detection applications. The scope is limited to GPR and WPR radars, which are imaging systems are designed to operate while in contact with, or in close proximity to the ground or the wall, and their emissions being directed into the ground or wall (e.g. measured by a proximity sensor or imposed by the mechanical design). It does not include radars operated from aircraft or spacecraft. The GPR/WPR applications in the present document are not intended for communications purposes, and the intended signal is not radiated into free space. The emissions into the air resulting from the operation of GPR/WPR imaging systems are therefore defined as those emissions radiated in all directions above the ground from the GPR/WPR equipment, including direct emissions from the housing/structure of the equipment and emissions reflected or passing through the media under inspection (referred in ECC/DEC/(06)08 [i.2] and in the present document as "undesired emissions"); they are therefore dependent on the operational conditions and are meaningful only if the GPR/WPR are coupled with the material being investigated. Figure 1 shows the scenario to be considered for the emissions radiated into the air by GPR/WPR.