DANSK DSF/IEC 62236-4 ED3 PDF

This International Standard applies to signalling and telecommunication apparatus that is installed inside the railway environment. Signalling and telecommunication apparatus mounted in vehicles is covered by IEC 62236-3-2:201X, signalling and telecommunication apparatus installed inside the substation and connected to substation equipment is covered by IEC 62236-5:201X. This International Standard specifies limits for emission and immunity and provides performance criteria for signalling and telecommunications (S&T) apparatus (including power supply systems belonging to S&T) which may interfere with other apparatus inside the railway environment, or increase the total emissions for the railway environment and so risk causing Electromagnetic Interference (EMI) to apparatus outside the railway system. The requirements specified in this standard apply for - vital equipment such as interlocking or command and control, - apparatus inside the 3 m zone, - ports of apparatus inside the 10 m zone with connection inside the 3 m zone, - ports of apparatus inside the 10 m zone with cable length > 30 m. Other apparatus not covered by at least one of these given cases should be in compliance with IEC 61000-6-2. If a port is intended to transmit or receive for the purpose of radio communication (intentional radiators, e.g. transponder systems), then the radiated emission requirement in this standard are not intended to be applicable to the intentional transmission from a radio-transmitter as defined by the ITU.