DANSK DSF/IEC TS 63107 ED1 PDF

This document states requirements for integration and testing of IAMS’s in low-voltage switchgear and controlgear assemblies – power switchgear and controlgear assemblies according to IEC 61439-2 (PSC-assemblies) to demonstrate their correct operation. This document does not address personnel safety or damage to the PSC-assembly. These equirements are dealt with in IEC TR 61641 (see also 10.10.1). NOTE – This document can be used as a reference for other types of assemblies in the IEC 61439 series, but adaptation of the test procedures and acceptance criteria can apply taking into account the specifics of such other assemblies or products. AMS’s consist of IACD‘s and IARD’s complying with their relevant product standard e.g. optical based IACD’s in accordance with IEC 60947-9-2 and AQD’s in accordance with EC 60947-9-1). For the reliable function in a PSC-assembly, the verification of correct operation of the complete system under built-in conditions is addressed. This document applies only to enclosed PSC-assemblies and deals with all required verifications needed for the integration in conjunction with IEC 61439-2. The test procedure given in this document takes into consideration: – the correct function of the IAMS within the PSC-assembly; – the prevention of unintended operation of the IAMS within the PSC-assembly; – the behaviour of the system immediately after the assembly is energised Different tests under more severe conditions (e.g. doors in open position) can be performed with an agreement between the user and the original manufacturer. This document does not supersede any individual product standard. Individual devices are equired to comply with their relevant standard. This document does not apply to integration of arc-fault detection devices (AFDD) according o IEC 62606. The informative Annex II gives guidance on particular constructional requirements for ncorporation of IAMS within a PSC-assembly. The informative Annex HH gives guidance for the user of PSC-assemblies about the aspects o be considered when specifying a PSC-assembly with an integrated IAMS.