DANSK DSF/ISO/DIS 16000-42 PDF

This part of ISO 16000 specifies the measurement methods and strategies for determining indoor the total number of airborne particles per unit volume of air, using a Condensation Particle Counter (CPC). This instrument counts all particles roughly between 10 nm to approximately 3 μm. As the particle number concentration is often dominated by the UFP fraction, obtained result can be used as an approximation of the UFP concentration. Quality assurance, determination of the measurement uncertainty and minimal reporting information are also part of this document. This document is applicable to indoor environments as defined in ISO 16000-1. This document does not address the determination of bioaerosols or the chemical characterization of particles. Nevertheless, some bioaerosols can be detected by the CPC and will then contribute to the measured count of particles. For the measurement and assessment of dust composition, see the relevant technical rules in the ISO 16000 International Standards series.