DANSK DSF/PREN 16228-1 PDF

This document specifies the common safety requirements for drilling and foundation equipment. This document deals with all significant hazards pertinent to drilling and foundation equipment, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the following: . transport; . equipment in service and out of service; . maintenance; . moving on site; . storage; . disabling and scrapping. The prEN 16228 series is applicable to drilling and foundation equipment, examples of which are listed in Annex A. Additional specific requirements for certain types of drilling and foundation equipment are given in parts 2 to 7 of this standard. NOTE The requirements specified in this part of the standard are common to two or more families of drilling and foundation equipment. This document gives safety requirements for all types of drilling and foundation equipment and shall be used in conjunction with one of parts 2 to 7. These machine specific parts do not repeat the requirements from part 1 but add to or replace the requirements for the type of drilling and foundation equipment in question. Machine specific requirements in parts 2 to 7 take precedence over the respective requirements of this standard. The following machines are excluded from the scope of this standard: . tunnelling machines according to EN 12336; . drill rigs used in oil and gas industry. This document deals with all significant hazards, hazardous situations and events relevant to drilling and foundation equipment, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of drilling and foundation equipment. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. If the carrier machine consists of an excavator as defined in EN 474, crane as defined in EN 13000 etc. the carrier shall be covered by its own standards to the extent the requirements as defined in Clause 5 of this standard prEN 16228-1 are not applicable. If drilling and foundation equipment operates with attachments other than those included in the scope of this standard, the safety standards applying to these attachments shall also be complied with. If the machine is intended to be used in potentially explosive atmosphere, additional requirements shall be met which are not covered by this standard.