DANSK DSF/PREN 61010-2-010 PDF

1.1.1 Equipment included in scope Replacement: Replace the first paragraph by the following: This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of its publications for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC guide 104 and ISO/IEC Guide 51. This Part 2 of IEC 61010 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever the heating of materials is one of the functions of the equipment. Addition: Add the following text after c): If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirement of those other part 2 standards, In particular, if equipment is intended to be used for IVD purposes, it will also need to meet the requirements of IEC 61010-2-101. However, when the equipment incorporates a refrigerating system and a heating function where the combination of the two introduces additional or more sever HAZARDS than if treated separately then the application of IEC 61010-2-012 should be considered instead of this part 2. See further information in the flow chart for selection process and guidance in the introduction. 1.1.2 Equipment excluded from scope Addition after item j): aa) equipment for the heating and ventilation of laboratories; bb) sterilizing equipment; cc) heating and/or cooling equipment which the OPERATOR is intended to enter, and which is large enough for the OPERATOR to remain inside with the door or doors closed.