DANSK DSF/PREN IEC 62841-2-22 PDF

IEC 62841-1:2014, Clause 1 is applicable, except as follows: Replacement of the third paragraph: The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. Addition: This document applies to hand-held cut-off machines fitted with – one bonded reinforced wheel of Type 41 or Type 42; or – one or more diamond cutting wheels with peripheral gaps, if any, • having no positive rake angle for flush cutters, power cutters and wall chasers; and • not exceeding 10 mm and having no positive rake angle for cut-off machines other than flush cutters, power cutters and wall chasers;