DANSK DSF/PREN ISO 24023-1 PDF

1.1 This part of ISO ##### establishes a system of designation for plasticized PVC thermoplastic material which may be used as the basis for specifications. 1.2 The types of PVC-U plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties a) Shore hardness b) density c) torsional-stiffness temperature at 300 MPa and on information about physical form, intended application and/or method of processing, important properties, additives, colorants. 1.3 This part of ISO ##### is applicable to all plasticized compositions of homopolymers and copolymers that contain at least 50 % (m/m) of vinyl chloride. It is also applicable to plasticized compositions containing chlorinated poly (vinyl chloride) and to plasticized compositions containing blends of one or more of the above-mentioned polymers, provided that the total amount of these polymers represents at least 50 % (m/m) of the polymer content of the composition. It applies to materials ready for normal use in the form of powder (dry blends), granules or pellets and to materials unmodified or modified by colorants, additives, fillers, etc. This part of ISO ##### does not apply to cellular plastics or to paste compositions (plastisols).