DIN 1530-3 PDF

Published Date: 11/01/2017

Tools for moulding - Part 3: Ejector pins with conical head

Published Date: 05/01/2011

Tools for moulding - Part 3: Ejector pins with conical head

Published Date: 02/01/2008

Draft Document - Tools for moulding - Part 3: Ejector pins with conical head

Published Date: 08/01/1991

Ejector pins with conical head

Published Date: 04/01/1993

Technical delivery conditions for DIN 6537 and DIN 6539 solid hardmetal twist drills - Checking of dimensions

Published Date: 04/01/1990

Morse taper shank end mills; technical delivery conditions

Published Date: 11/01/1995

Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts; open throat tools with removable and interchangeable dies, sizes A to G, Q bis T, V and W; German version EN 50109-2-2:1995

Published Date: 02/01/2005

Drill chuck mounting arrangements - Taper arbors

Published Date: 01/01/1991

Addendum 1 to ANSI/NCITS X3.100-1989, Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks - NUI and NUI-Derived Facility Extensions (formerly ANSI X3.100-1989(R1995) Add.1:1991)

Published Date: 01/01/1989

Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks (CCITT X.25) (formerly ANSI X3.100-1989(R1995)

Published Date: 01/01/1983

Unrecorded Magnetic Tape Minicassette For Information Interchange, Coplanar 3.81 mm (0.150 Inch) (formerly ANSI X3.103-1983(R1996))

Published Date: 01/01/1990

Specification for General Purpose Paper Cards for Information Interchange (formerly ANSI X3.11-1990(R2002))

Published Date: 01/01/1986

Matrix Character Sets for Optical Character Recognition (OCR-M) (formerly ANSI X3.111-1986(R1997))

Published Date: 01/01/1984

14-Inch (356 mm) Diameter Low Surface Friction Magnetic Storage Disk (formerly ANSI X3.112-1984(R1996))