DIN 6647-4 PDF

Published Date: 07/01/2020

Means of packaging - Cylindrical beverage containers - Part 4: Disposal pack with allowable operating pressure up to 0.4 MPa, nominal volume up to 60 l

Published Date: 11/01/2018

Draft Document - Means of packaging - Cylindrical beverage containers - Part 4: Disposal pack with allowable operating pressure up to 4 bar, nominal volume up to 60 litres

Published Date: 11/01/2011

Means of packaging - Cylindrical beverage containers - Part 4: Disposal pack with allowable operating pressure up to 4 bar, nominal volume up to 60 litres

Published Date: 10/01/2010

Draft Document - Means of packaging - Cylindrical beverage containers - Part 4: Disposal pack with allowable operating pressure up to 3 bar, nominal volume up to 60 litres

Published Date: 04/01/2004

Means of packaging - Cylindrical beverage containers - Part 4: Non-returnable packaging withallowable operating pressure up to 3 bar, nominal volume up to 60 litres

Published Date: 03/01/2000

Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l; English version of DIN EN 13007

Published Date: 06/01/2019

Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113.6 l to 220 l (ISO 20848-3:2018)

Published Date: 09/01/2008

Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216.5 l (ISO 15750-1:2002)

Published Date: 08/01/2010

Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 5: Non-removable head (tight head) plastics drum and removable head (open head) plastics drum with plug/bung closure system of nominal capacity exceeding 200 l

Published Date: 09/27/2006

Advanced technical ceramics — Ceramic composites. Methods of test for reinforcements — Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature

Published Date: 06/22/2021

Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation

Published Date: 07/21/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 10: Determination of coating thickness by cross sectioning

Published Date: 10/19/2005

Advanced technical ceramics — Methods of test for ceramic coatings — Part 11: Determination of internal stress by the Stoney formula

Published Date: 09/01/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 8: Rockwell indentation test for evaluation of adhesion

Published Date: 02/11/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 9: Determination of fracture strain