DIN 85051-1 - DRAFT PDF

Published Date: 11/01/2022

Pressfitting systems for pipes for use in shipbuilding - General requirements and test methods - Part 1: Operating pressures up to 16 bar

Published Date: 12/31/2021

Draft Document - Pressfitting systems for pipes for use in shipbuilding - General requirements and test methods - Part 1: Operating pressures up to 16 bar

Published Date: 10/31/2018

Pressfitting systems for pipes for use in shipbuilding - General requirements and test methods - Part 1: Operating pressures up to 16 bar

Published Date: 01/01/2018

Draft Document - Pressfitting systems for pipes for use in shipbuilding - General requirements and test methods - Part 1: Operating pressures up to 16 bar

Published Date: 12/01/2012

Pressfitting systems for pipes for use in shipbuilding - General requirements and test methods - Part 1: Operating pressures up to 16 bar

Published Date: 11/01/2011

Draft Document - Pressfitting systems for pipes for use in shipbuilding - General requirements and tst methods - Part 1: Operating pressures up to 16 bar

Published Date: 10/01/2018

Welding necks of CuNi10Fe1.6Mn - Technical specifications

Published Date: 01/01/2002

Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); English version of DIN EN ISO 15541

Published Date: 03/01/2018

Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes

Published Date: 12/01/2018

Scupper with water trap, non shut-off type

Published Date: 01/01/1991

Addendum 1 to ANSI/NCITS X3.100-1989, Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks - NUI and NUI-Derived Facility Extensions (formerly ANSI X3.100-1989(R1995) Add.1:1991)

Published Date: 01/01/1989

Interface Between DTE & DCE for Packet Mode Operation with Packet Switch Data Communications Networks (CCITT X.25) (formerly ANSI X3.100-1989(R1995)

Published Date: 01/01/1983

Unrecorded Magnetic Tape Minicassette For Information Interchange, Coplanar 3.81 mm (0.150 Inch) (formerly ANSI X3.103-1983(R1996))

Published Date: 01/01/1990

Specification for General Purpose Paper Cards for Information Interchange (formerly ANSI X3.11-1990(R2002))

Published Date: 01/01/1986

Matrix Character Sets for Optical Character Recognition (OCR-M) (formerly ANSI X3.111-1986(R1997))

Published Date: 01/01/1984

14-Inch (356 mm) Diameter Low Surface Friction Magnetic Storage Disk (formerly ANSI X3.112-1984(R1996))