DIN EN 13523-1 - DRAFT PDF

Published Date: 06/01/2024

Coil coated metals - Test methods - Part 1: Film thickness

Published Date: 08/01/2023

Draft Document - Coil coated metals - Test methods - Part 1: Film thickness; German and English version prEN 13523-1:2023

Published Date: 04/01/2010

Coil coated metals - Test methods - Part 1: Film thickness

Published Date: 12/01/2001

Coil coated metals - Test methods - Part 1: Coating thickness; English version of DIN EN 13523-1

Published Date: 12/01/2001

Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); English version of DIN EN ISO 3497

Published Date: 12/01/2017

Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)

Published Date: 10/01/2010

Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique

Published Date: 02/01/2018

Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)

Published Date: 04/26/2006

Short-circuit currents - Calculation of effects - Part 2: Examples of calculation.

Published Date: 02/09/2005

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values

Published Date: 02/17/2010

Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations.

Published Date: 06/28/2006

Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results (IEC/TR 61000-2-8:2002)

Published Date: 07/19/2006

Electromagnetic compatibility (EMC) - Part 3: Limits - Section 6: Assessment of emission limits for distorting loads in MV and HV power systems - Basic EMC publication (IEC/TR 61000-3-6:1996)

Published Date: 03/15/2006

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series .