DNV DNV-OSS-315 PDF

DNV DNV-OSS-315 PDF

Name:
DNV DNV-OSS-315 PDF

Published Date:
04/01/2010

Status:
[ Obsolete ]

Description:

VERIFICATION OF ONSHORE LNG AND GAS FACILITIES

Publisher:
DNV

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$17.1
Need Help?
W/D S/S BY DNV-DSS-315

Scope of application for verification

This specification may be adopted for the verification of parts of onshore liquefied natural gas and gas receiving facilities during the project development phase starting from detailed design up to and including commissioning and startup.

The LNG and gas facilities covered in this specification comprise the following critical systems:

— support structures and foundations

— non-cryogenic critical vessels, piping and equipment

— cryogenic critical vessels, piping and equipment (including transfer piping)

— LNG storage tanks

— open hazardous drains

— pressure relief systems

— ignition prevention and control systems

— emergency shutdown system

— blowdown system

— fire and gas detection system

— fire and blast protection

— emergency power supply

— escape and evacuation means

— emergency communication systems

— environmental control.

which are applied in various configurations and tailored to each particular project's specific requirements. The specification does not cover the following:

— Jetty, Mooring and Marine related facilities (with the exception of the shore based transfer systems and associated safety equipment. Jetty structures are covered by DNV-OSS-304).

— the import and export pipelines within plant battery limits (this is covered under DNV-OSS-301)

Compliance to CE Marking Directives such as Pressure Equipment Directive (PED/97/23/EC), Machinery Equipment Directive 98/37/EC and Explosion Proof Devices ATEX 94/9/ EC which are applicable in the European Community are not covered in this specification.

This OSS describes the principle of a levelled verification involvement, where the extent of verification involvement is linked to the risks associated with part or all of the facility.

The primary scope of DNV's verification work is the verification of the integrity of gas facilities and the safety of its personnel and those in close proximity to it. Other aspects, such as the verification of the environmental safety of the facility, or its ability to meet the Client's business objectives, may be included in DNV's scope of work if desired by the Client.

Statutory verification (or certification) of onshore gas facilities to the requirements of National Authorities is not included specifically in the scope of application of this OSS. Such verification (or certification) shall be governed by the regulations of the relevant Authority. However, if detailed procedures are not given by these Authorities, this OSS shall be used by DNV as a guideline for its work.


Edition : 10
File Size : 1 file , 1 MB
Number of Pages : 55
Published : 04/01/2010

History


Related products

DNV DNV-OS-C104
Published Date: 07/01/2024
Structural design of self-elevating units
$17.1
DNV DNV-RP-F205
Published Date: 09/01/2019
Global performance analysis of deepwater floating structures
$43.5
DNV DNV-OS-C201
Published Date: 07/01/2017
Structural design of offshore units - WSD method
$17.1
DNV GL ADDITIONAL RULES AND GUIDELINES VI-7-4
Published Date: 01/01/2016
VI-Rules for Classification and Construction Additional Rules and Guidelines Part 7-Guidelines for the Performance of Type Approvals Chapter 4-Test Requirements for Sealing Systems of Bulkhead and Deck Penetrations
$17.1

Best-Selling Products

IEC/TS 60034-16-2 Ed. 1.0 b:1991
Published Date: 02/15/1991
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies
$33
IEC/TS 60034-16-3 Ed. 1.0 b:1996
Published Date: 02/14/1996
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance
$43.5
IEC/TS 60034-17 Ed. 3.0 b:2002
Published Date: 03/26/2002
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
$18.3
IEC/TS 60034-17 Ed. 4.0 b:2006
Published Date: 05/09/2006
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
$47.1
IEC/TS 60034-18-32 Ed. 1.0 b:1995
Published Date: 03/29/1995
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV
$18.3
IEC/TS 60034-18-33 Ed. 1.0 b:1995
Published Date: 03/29/1995
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA a
$32.1