ETSI GTS GSM 05.05 PDF

ETSI GTS GSM 05.05 PDF

Name:
ETSI GTS GSM 05.05 PDF

Published Date:
07/01/1996

Status:
Active

Description:

Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05)

Publisher:
European Telecommunications Standards Institute

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Czech version):
200 business days

SKU:
etsi-gts-gsm-05-05_952549

Choose Document Language:
0
Need Help?
This European Telecommunications Standard (ETS) defines the requirements for the transceiver of the pan-european digital mobile cellular and personal communication systems operating in the 900 MHz and 1800 MHz band (GSM 900 and DCS 1800). Requirements are defined for two categories of parameters: - those that are required to provide compatibility between the radio channels, connected either to separate or common antennas, that are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. - those that define the transmission quality of the system. This ETS defines RF characteristics for the Mobile Station (MS) and Base Station System (BSS). The BSS will contain either Base Transceiver Stations (BTS) or microcell base transceiver stations (micro-BTS). The precise measurement methods are specified in GSM 11.10 and 11.20. Unless otherwise stated, the requirements defined in this ETS apply to the full range of environmental conditions specified for the equipment (see Annex D). In this ETS some relaxations are introduced for GSM 900 mobile stations which fulfil the following conditions: - pertain to power class 4 or 5 (see section 4.1.1); - have a total weight less than 200 g (excluding battery); - have a volume less than 500 cm3 (excluding battery). In this standard these mobile stations are referred to as small MS. Mobile stations may operate on more than one of the frequency bands specified in section 2. These mobile stations, defined in GSM 02.06, are refered to as Multi band mobile stations in this standard. Multi band mobile stations shall meet all requiremwnts for each of the bands supported. The relaxation on GSM 900 for a small MS are also va0id for a multi band MS if it complies with the definition of a small MS. The RF characteristics of repeaters are defined in Annex E of this ETS. Annex D and E are the only sections of this ETS applicable to repeaters. Annex E does not apply to the MS or BSS.
Edition : 5.2.0
File Size : 1 file , 420 KB
Note : This product is unavailable in Russia, Ukraine, Belarus
Number of Pages : 46
Published : 07/01/1996

History

ETSI GTS GSM 05.05
Published Date: 07/01/1996
Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05)
ETSI GTS GSM 05.05
Published Date: 05/01/1996
Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05)
ETSI GTS GSM 05.05
Published Date: 03/01/1996
Digital cellular telecommunications system (Phase 2) (GSM); Radio transmission and reception (GSM 05.05)

Related products

ETSI TS 123 335
Published Date: 07/01/2020
Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; User Data Convergence (UDC); Technical realization and information flows; Stage 2 (3GPP TS 23.335 version 16.0.0 Release 16)
9.81 €
ETSI TS 145 005
Published Date: 11/01/2020
Digital cellular telecommunications system (Phase 2+) (GSM); GSM/EDGE Radio transmission and reception (3GPP TS 45.005 version 16.1.0 Release 16)
9.81 €
ETSI TR 103 611
Published Date: 06/01/2020
Satellite Earth Stations and Systems (SES); Seamless integration of satellite and/or HAPS (High Altitude Platform Station) systems into 5G and related architecture options
9.81 €
ETSI TS 125 431
Published Date: 08/01/2020
Universal Mobile Telecommunications System (UMTS); UTRAN Iub interface Layer 1 (3GPP TS 25.431 version 16.0.0 Release 16)
9.81 €

Best-Selling Products

CAN/CSA-IEC 31010:20
Published Date: 04/01/2020
Risk management - Risk assessment techniques (Adopted IEC 31010:2019, second edition, 2019-06)
70.50 €
CAN/CSA-IEC 61000-4-15:12 (R2021)
Published Date: 06/01/2012
CAN/CSA-IEC 61000-4-15:12 - Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications (Adopted IEC 61000-4-15:2010, edition 2.0, 2010-08)
69.30 €
CAN/CSA-IEC 61000-4-18:14 (R2023)
Published Date: 10/01/2014
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (Adopted IEC 61000-4-18:2011, edition 1:2006 consolidated with amendment 1:2010)
78.00 €
CAN/CSA-IEC 61000-4-2:12 (R2022)
Published Date: 06/30/2012
Electromagnetic Compatibility (EMC) - Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test (Adopted CEI/IEC 61000-4-2:1995 + A1:1998, edition 1.1, 1999-05)
84.90 €
CAN/CSA-IEC 61000-4-3:21
Published Date: 05/01/2021
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2006+A1:2007+A2:2010, IDT)
184.80 €
CAN/CSA-IEC 61000-4-30:16
Published Date: 08/05/2022
Amendment 1 to Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (Adopted IEC 61000-4-30:2015, third edition, 2015-02)
3.30 €