FORD ESA-M1C213-A PDF

Published Date: 10/14/2008

GREASE, LITHIUM-12 HYDROXYSTEARATE POLYMER ADDITIVE-EXTREME PRESSURE-NLGI #1 ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 02/23/2004

GREASE, LITHIUM-12 HYDROXYSTEARATE POLYMER ADDITIVE-EXTREME PRESSURE-NLGI #1 ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 09/18/1987

GREASE, LITHIUM 12 HYDROXYSTEARATE - POLYMER ADDITIVE - EXTREME PRESSURE - NLGI #1

Published Date: 05/30/1986

SEALER, HOT MELT - PREFORMED - PRESSURE SENSITIVE - PAINTABLE

Published Date: 09/21/2023

PAINT, TWO COMPONENT COLOR BASECOAT/PAINT, ULTRAVIOLET + THERMAL DUAL CURE TWO COMPONENT CLEARCOAT FOR PLASTIC, INTERIOR BASE/CLEAR COAT SYSTEM, HIGH GLOSS (A-B) ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 01/20/2016

TUBING, ALLOYED POLYAMIDE COVER, FEP INNER TUBE, CONDUCTIVE, LOW PERMEATING FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 01/14/2010

POLYIMIDE (PI), 15% GRAPHITE POWDER FILLED SINTERED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 07/13/2023

Additive manufacturing of metals - Non-destructive testing and evaluation - Defect detection in parts (ISO/ASTM TR 52905:2023)

Published Date: 07/01/2022

Additive manufacturing - Non-destructive testing - Intentionally seeding flaws in metallic parts (ISO/ASTM/TR 52906:2022)

Published Date: 10/21/2020

Additive manufacturing - Design - Functionally graded additive manufacturing (ISO/ASTM/TR 52912:2020)

Published Date: 03/01/2022

Additive manufacturing for medical - Data - Optimized medical image data (ISO/ASTM TR 52916:2022)

Published Date: 11/28/2022

Additive manufacturing - Round robin testing - General guidelines (ISO/ASTM TR 52917:2022)

Published Date: 07/25/2023

Additive Manufacturing of metals - Feedstock materials - Correlating of rotating drum measurement with powder spreadability in PBF-LB machines (ISO/ASTM TR 52952:2023)