FORD WSB-M2D462-A1 PDF

Published Date: 11/05/2010

THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 60 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 09/21/2009

THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 60 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 10/13/2004

THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 60 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 11/21/1997

THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 60 A HARDNESS, EXTERIOR ONLY

Published Date: 04/19/2007

DRAFT, FABRIC, DUBUFFET – VERSION 8C, WOVEN JACQUARD UNLAMINATED -- ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 03/15/2015

TAPE, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, EXTERIOR - 0.20 MM (8 MIL) NOMINAL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 06/12/2017

FABRIC, UNICODE PATTERN, WARP KNIT, LAMINATE EMBOSSED FABRIC ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 05/04/2006

PADDING, POLYESTER FIBER - NEEDLED - 12.0 OZ/YD SQ (0.407 KG/M SQ)

Published Date: 07/13/2023

Additive manufacturing of metals - Non-destructive testing and evaluation - Defect detection in parts (ISO/ASTM TR 52905:2023)

Published Date: 07/01/2022

Additive manufacturing - Non-destructive testing - Intentionally seeding flaws in metallic parts (ISO/ASTM/TR 52906:2022)

Published Date: 10/21/2020

Additive manufacturing - Design - Functionally graded additive manufacturing (ISO/ASTM/TR 52912:2020)

Published Date: 03/01/2022

Additive manufacturing for medical - Data - Optimized medical image data (ISO/ASTM TR 52916:2022)

Published Date: 11/28/2022

Additive manufacturing - Round robin testing - General guidelines (ISO/ASTM TR 52917:2022)

Published Date: 07/25/2023

Additive Manufacturing of metals - Feedstock materials - Correlating of rotating drum measurement with powder spreadability in PBF-LB machines (ISO/ASTM TR 52952:2023)