FORD WSK-M2P168-A PDF

Published Date: 12/14/2010

PAINT PERFORMANCE, ZINC-RICH PRIMER, COOLING AND ALLIED TUBES ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 08/12/2003

PAINT PERFORMANCE, ZINC-RICH PRIMER, COOLING AND ALLIED TUBES ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 05/01/1992

PAINT PERFORMANCE, ZINC RICH PRIMER, COOLING AND ALLIED TUBES

Published Date: 02/23/2006

THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 09/15/2017

POLYETHYLENE (PE), MOLDING COMPOUND, HIGH DENSITY, LOW MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 11/11/2015

POLYPROPYLENE (PP) 20% LONG GLASS FIBER REINFORCED, STRUCTURAL, NON UV-STABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 10/01/1988

GRINDING COOLANTS - SPECIAL PURPOSE

Published Date: 09/27/2006

Advanced technical ceramics — Ceramic composites. Methods of test for reinforcements — Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature

Published Date: 06/22/2021

Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation

Published Date: 07/21/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 10: Determination of coating thickness by cross sectioning

Published Date: 10/19/2005

Advanced technical ceramics — Methods of test for ceramic coatings — Part 11: Determination of internal stress by the Stoney formula

Published Date: 09/01/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 8: Rockwell indentation test for evaluation of adhesion

Published Date: 02/11/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 9: Determination of fracture strain