FORD WSS-M4D959-A PDF

Published Date: 08/08/2011

POLYPROPYLENE (PP), HOMOPOLYMER 20% CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 07/26/2006

POLYPROPYLENE (PP), HOMOPOLYMER 20% CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 08/30/2000

POLYPROPYLENE (PP), HOMOPOLYMER 20 % CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25 % MIN POST CONSUMER CONTENT

Published Date: 06/23/2022

THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 75 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 05/07/2012

GASKET, ARAMIDE FIBRE SHEETS, REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 12/12/2013

ADHESIVE, RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 02/29/2008

NYLON, (TYPE 6), 40% GLASS REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***

Published Date: 07/01/1998

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs used with multiple styli

Published Date: 12/01/1998

Pen-Injectors for Medical Use - Part 3: Finished Cartridges - Requirements and Test Methods

Published Date: 05/26/1994

Reciprocating Internal Combustion Compression-Ignition Engines - Apparatus for Measurement of the Opacity and for Determination of the Light Absorption Coefficient of Exhaust Gas - DRAFT

Published Date: 09/01/1995

Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 228-1 Threads with Elastomeric or Metal-to-Metal Sealing - Part 2: Heavy-Duty (S series) and Light-Duty (L series) Stud Ends with Elastomeric Sealing (type E) (Revision of ISO 1179:1981)

Published Date: 09/01/1995

Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 228-1 Threads with Elastomeric or Metal-to-Metal Sealing - Part 3: Light-Duty (L series) Stud Ends with Sealing by O-Ring with Retaining Ring (Types G and H) (Revision of ISO 1179:1981)

Published Date: 09/01/1995

Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 228-1 Threads with Elastomeric or Metal-to-Metal Sealing - Part 4: Stud Ends for General Use Only with Metal-to-Metal Sealing (Type B) (Revision of ISO 1179:1981)