Name:
FORD WSS-M4G359-A PDF

Published Date:
04/05/2022

Status:
[ Revised ]

Description:

DUPLEX SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE OR AIRLESS, SPRAYABLE, HEAT CURING, PAINTABLE, INTERIOR AND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A

Publisher:
Ford Motor Company

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

The material defined by this specification is a vinyl based, pumpable, or airless sprayable, paintable, heat curing sealer which is non-yellowing.

WSS-M4G359-A is suitable for three wet and traditional paint systems; however compatibility with paints should be verified for any material on the approved source list. Upon initial qualification, sealers are tested to paint systems in current use and need to be validated on a regional basis.

WSS-M4G359-A3 needs to be fully cured (e.g. in Primer Oven) before paint application used in conventional paint systems.

Edition :	22
File Size :	1 file , 300 KB
Number of Pages :	14
Published :	04/05/2022

History

FORD WSS-M4G359-A

Published Date: 08/17/2023

DUPLEX SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE OR AIRLESS, SPRAYABLE, HEAT CURING, PAINTABLE, INTERIOR AND EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M4G359-A

Published Date: 04/05/2022

DUPLEX SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE OR AIRLESS, SPRAYABLE, HEAT CURING, PAINTABLE, INTERIOR AND EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M4G359-A

Published Date: 01/12/2022

DUPLEX SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE OR AIRLESS, SPRAYABLE, HEAT CURING, PAINTABLE, INTERIOR AND EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M4G359-A

Published Date: 04/18/2019

DUPLEX SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE OR AIRLESS, SPRAYABLE, HEAT CURING, PAINTABLE, INTERIOR AND EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M4G359-A

Published Date: 10/12/2018

DUPLEX SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE OR AIRLESS, SPRAYABLE HEAT CURING, PAINTABLE, INTERIOR AND EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M4G359-A

Published Date: 06/16/2010

DUPLEX SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE OR AIRLESS, SPRAYABLE HEAT CURING, PAINTABLE, INTERIOR AND EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M4G359-A

Published Date: 01/29/2009

DUPLEX SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE OR AIRLESS, SPRAYABLE HEAT CURING, PAINTABLE, INTERIOR AND EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M4G359-A

Published Date: 07/13/1995

SEALER, VINYL BASED, NON-YELLOWING, PUMPABLE, HEAT CURING, PAINTABLE, INTERIOR

Related products

FORD ESF-M4D511-A

Published Date: 04/28/2006

POLYAMIDE (PA) 66, PLASTICIZED - HIGH TEMPERATURE RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSS-M1H981-A

Published Date: 12/16/2008

FABRIC, MAJESTIC I PATTERN, WOVEN JACQUARD, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD WSF-M4D728-A2

Published Date: 01/12/2010

STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD RECORD OF REVISIONS

Published Date: 01/06/2021

WWSS FASTENER STANDARDS CHECKLIST

Best-Selling Products

CAN/CSA-ISO/TS 11137-4:21

Published Date: 05/01/2021

Sterilization of health care products - Radiation - Part 4: Guidance on process control (Adopted ISO technical specification 11137-4:2020, first edition, 2020-06)

$72

CAN/CSA-ISO/TS 11139:18

Published Date: 06/01/2018

Sterilization of health care products - Vocabulary (Adopted ISO/TS 11139:2006, second edition, 2006-01-15)

$32.7

CAN/CSA-ISO/TS 14048-03 (R2021)

Published Date: 03/14/2003

Environmental Management - Life Cycle Assessment - Data Documentation Format (Adopted ISO/TS 14048:2002, first edition, 2002-04-01)

$50.4

CAN/CSA-ISO/TS 14798-07

Published Date: 03/01/2007

Lifts (Elevators), Escalators and Moving Walks - Risk Assessment and Reduction Methodology

$51.3

CAN/CSA-ISO/TS 16058-05

Published Date: 02/01/2005

Health Informatics - Interoperability of Telelearning Systems (Adopted ISO/TS 16058:2004, first edition, 2004-07-01)

CAN/CSA-ISO/TS 16775:17

Published Date: 10/01/2017

Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (Adopted ISO technical specification 16775:2014, first edition, 2014-05-15)

$68.7