GMKOREA EDS-A-1024 PDF

APPLICATION

This standard applies to drawing practices for the following springs used by GM DAEWOO Auto and Technology Company (hereinafter referred to as the "GMDAT").

1.1. Compression coil spring (Fig. 1, 2, 3, 4, 5)

1.2. Extension coil spring (Fig. 7, 8, 9)

1.3. Torsion coil spring (Fig. 10, 11)

1.4. Leaf spring (Fig. 12, 13)

1.5. Volute spring (Fig. 14)

1.6. Spiral spring (Fig. 15)

1.7. Belleville spring (Fig. 16)