GMNA GM9030P PDF

Name:
GMNA GM9030P PDF

Published Date:
10/01/1988

Status:
[ Revised ]

Description:

Oil Separation from Grease

Publisher:
General Motors North America

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

ENGLISH

1 SCOPE.

This method is used for determining the tendency of the oil in lubricating grease to separate at elevated temperature. It consists of heating the specimen in a wiregauze cone under static conditions for the time and at the temperature required by the specification, then determining the percentage (mass) of the oil drained through the cone.

Edition :	88
File Size :	1 file , 66 KB
Number of Pages :	1
Published :	10/01/1988

History

GMNA GM9030P

Published Date: 10/01/2012

Oil Separation from Grease

$12.9

GMNA GM9030P

Published Date: 10/01/1988

Oil Separation from Grease

$23.4

Related products

GMNA GMN10061

Published Date: 07/01/2008

Part Performance Requirements for Finishes of Electrical/Electronic Components

$12.9

GMNA 9985310

Published Date: 09/01/1980

Graphite, Flake

$23.4

GMNA 9984300

Published Date: 11/01/2019

Blackout/High Temperature Resistant Paint for Bulb Shields

GMNA GMP.EEBC.018

Published Date: 10/01/2012

Thermoplastic Polyester Elastomer – 48 Type D Hardness, 170 MPa Flexural Modulus, Lubricated

Best-Selling Products

IEC/TS 60034-16-2 Ed. 1.0 b:1991

Published Date: 02/15/1991

Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

$33

IEC/TS 60034-16-3 Ed. 1.0 b:1996

Published Date: 02/14/1996

Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance

$43.5

IEC/TS 60034-17 Ed. 3.0 b:2002

Published Date: 03/26/2002

Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

$18.3

IEC/TS 60034-17 Ed. 4.0 b:2006

Published Date: 05/09/2006

Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

$47.1

IEC/TS 60034-18-32 Ed. 1.0 b:1995

Published Date: 03/29/1995

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV

$18.3

IEC/TS 60034-18-33 Ed. 1.0 b:1995

Published Date: 03/29/1995

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA a

$32.1