IEC 61757-2-2 Ed. 1.0 b:2016 PDF

IEC 61757-2-2 Ed. 1.0 b:2016 PDF

Name:
IEC 61757-2-2 Ed. 1.0 b:2016 PDF

Published Date:
05/12/2016

Status:
Active

Description:

Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing

Publisher:
International Electrotechnical Commission

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$83.4
Need Help?
IEC 61757-2-2:2016 defines detail specifications for distributed temperature measurement by a fibre optic sensor, also known as fibre optic distributed temperature sensing (DTS). DTS includes the use of Raman scattering, Brillouin scattering and Rayleigh scattering effects. In addition, Raman scattering and Rayleigh scattering based measurements are performed with a single-ended fibre configuration only. Brillouin scattering based measurements are performed with a single-ended fibre or fibre loop configuration. The technique accessible from both sides at same time (e. g. Brillouin optical time domain analysis, BOTDA) is referred to here as a loop configuration. Generic specifications for fibre optic sensors are defined in IEC 61757-1:2012. This part of IEC 61757 specifies the most important DTS performance parameters and defines the procedures for their determination. In addition to the group of performance parameters, a list of additional parameters has been defined to support the definition of the measurement specifications and their associated test procedures. The definitions of these additional parameters are provided for informational purposes and should be included with the sets of performance parameters. A general test setup is defined in which all parameters can be gathered through a set of tests. The specific tests are described within the clause for each measurement parameter. This general test setup is depicted and described in Clause 4 along with a list of general information that should be documented based upon the specific DTS instrument and test setup used to measure these parameters as per IEC 61757-2-2. Annex A provides a blank performance parameter table which should be used to record the performance parameter values for a given DTS instrument and chosen optical test setup configuration. Annex B provides guidelines for optional determination of point defect effects. Keywords: fibre optic distributed temperature sensing (DTS)
Edition : 1.0
File Size : 1 file , 2.2 MB
Note : This product is unavailable in Ukraine, Russia, Belarus
Number of Pages : 65
Published : 05/12/2016

History

IEC 61757-2-2 Ed. 1.0 b:2016
Published Date: 05/12/2016
Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing
$83.4

Related products

IEC 62343-5-1 Ed. 2.0 en:2014
Published Date: 11/25/2014
Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
$43.5
IEC 61757-2-2 Ed. 1.0 b:2016
Published Date: 05/12/2016
Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing
$83.4
IEC 62343-3-2 Ed. 1.0 b:2016
Published Date: 05/12/2016
Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor
$28.5

Best-Selling Products

ANSI 136.48-2023
Published Date: 12/01/2023
American National Standard For Roadway and Area Lighting Equipment - Wireless Networked Lighting Controllers
$23.4
ANSI A14.2-1972
Published Date: 1972
American National Standard: Safety Requirements for Portable Metal Ladders
$2.4
ANSI A14.2-1990
Published Date: 09/25/1992
American National Standard for Ladders, Portable Metal, Safety Requirements
ANSI A14.2-2000
Published Date: 01/01/2000
American National Standard for Ladders - Portable Metal - Safety Requirements
ANSI A14.2-2017
Published Date: 2017
American National Standard for Ladders - Portable Metal - Safety Requirements
$82.5
ANSI A14.4-2002
Published Date: 01/01/2002
American National Standard Safety Requirements for Job Made Wooden Ladders